refinish or not?
 

I have recently been handed down my grandfathers Winchester model 74 22 long rifle. I'm not really sure if it is rare but I do know that it was made between 1939 and 1955. Question is, should I refinish it or not? It does have some scratches and wear on the stock but I understand that refinishing it may hurt the value. I'm not selling it, not sure if it is really worth much as far as money but it means a lot to me. just wondering what you guys and gals would do. Also anyone have an idea of the value of the gun? It looks to be in good shape. Thanks

If you're considering this an heirloom and shooter, you might consider the stories and memories behind those dings and scratches? Refinished, it'll be "just another old refinished rifle." What makes this one special?

Great point. It's probably better left just the way it is. Maybe just a good cleaning and make some good memories with it for my son when I pass it down to him. Thanks for your advice.

I agree, leave it, refinishing it will only hurt the value, plus you ant selling it so there is something to those dings and scratches

What they said...leave "as is".

One more "leave as is" recommendation ... with one exception. If you plan to use it. make sure it is in good working order.

Does it have an oil finish on it?
If there are larger areas of bare or open grain and you,plan on taking it out in the weather, you might want to wipe on a thin coat of Birchwood Casey Tru Oil and then wipe off the excess.

One coat will seal the wood and will not leave you with a shiny plastic looking finish.

You can also remove it with denatured alcohol, so if you want to thin down the look of the new finish, just give it a wiping with a soft lint free cloth like denim.

If you are planning on hunting with it, I would sand it down, give it a good rubbing with 400 and 600 grit, apply a coat of boiled linseed,diluted with lacquer thinner let it dry for a couple days, then repeat. Then, when good and dry, rub the stock down with 0000 steel wool until you feel no bristles sticking up through the finish. Now, use undiluted linseed and apply up to 5 or 6 more coats, allowing each coat to thoroughly dry. When finished, your stock will look great, and be protected from the elements. then, if you happen to put a ding in it while out , it is an easy fix, more linseed.

Two year old post fellas, either the guy did or didn't re-finish it by now, no sense kickin this one any further down the highway...

I think a few cases of Cabin Fever are setting in.

The original question does come up alot.