![]() |
RE: Remington 870 Express (What happend to Remington?)
I'm by no means protecting Remington and their Quality Standards!
However, all the gun manufactures that have been purchased by investment firms, they see only one thing, the bottom line. "The most production at the cheapest cost and as fast as possible! It is a sad day for firearm makers and quality standards!?! |
RE: Remington 870 Express (What happend to Remington?)
ORIGINAL: bigcountry Remington has been turning out turds for 8 years now. Friends I hunt with bought brand new 1187's slug guns, and jams every shot. It won't lift the shell up. Bolt is so rough it gets binded up. I have had two 1187's and an 1100 from the 80's and 90s and no problems. I have had littlerly dozens of 700's. And never had a problem with any until 2002. Rough barrels, bad fitting between barrels and stocks, crowns out of round. I am done with remington until they clean thier act up a tad. |
RE: Remington 870 Express (What happend to Remington?)
ORIGINAL: 98Redline This is a pretty common issue with the 870 express. The rough chamber causes all sorts of ejection failures and/or rough cycling of the action. A bronze brush with some 0000 steel wool wrapped around it, chucked into a drill and lubed with a decent oil will do the trick. Yeah, I know, a new Remington shouldn't have to have this done to it but once that is done, it is all the problems you will probably ever have with it. |
RE: Remington 870 Express (What happend to Remington?)
Thanks for all the replies....
I was using Remington #6 shot (an old box I had laying around) - which is a little big for blasting clays, but what the the heck. My daughters boyfriend and his friend had two boxes of Winchester #8 target load (the cheap stuff with the aluminum end casing). Anyway, I did a google search about the 870 Express "problem" and found an article and a discussionin Shotgun Journal or Gunner's World or some site like that. They mentioned the lack of quality control with Remington's Express line of shotguns. They are still fantastic shotguns, and they churn out millions of them every year. But the Remington 870 Wingmaster has more attention paid to it and everything is polished, honed, and smoothed out. The 870 Express is polished and that's about it. The action is a little rougher than the Wingmaster and takes more time to break in. The article also mentioned the 0000 steel wool/bore brush/cordless drill trick. But regardless, 870's are darn near indestructible. You can take one, drop it in the marsh, drop it in the mud, pick it up, wipe it off, and keep going. Everybody has (or has had) an 870. They are the F150 of shotguns. But yet, it just seems that over these last couple of years, the quality of the 870 Express has gone down more so than in the past. [>:] |
RE: Remington 870 Express (What happend to Remington?)
Are they doing a plastic trigger guard yet? I cant stand the way they cut the ribs on them, and that stupid key lock on the trigger. Then the dang laminate stock. Pure crap. I've got a model from the late 60's that was previously a prison gun. Refinished the wood and reblued and I've never seen a smoother action. True test is to hold the barrel up and push the slide release. A little shake and it drops right open.
|
RE: Remington 870 Express (What happend to Remington?)
ORIGINAL: SWThomas ORIGINAL: bigcountry Remington has been turning out turds for 8 years now. Friends I hunt with bought brand new 1187's slug guns, and jams every shot. It won't lift the shell up. Bolt is so rough it gets binded up. I have had two 1187's and an 1100 from the 80's and 90s and no problems. I have had littlerly dozens of 700's. And never had a problem with any until 2002. Rough barrels, bad fitting between barrels and stocks, crowns out of round. I am done with remington until they clean thier act up a tad. Then you have obviously never worked in a quality department or calculated yield or failure rates for a product. SWT, how many have you owned? How many 700's have you owned? How many other types of guns have you owned? |
RE: Remington 870 Express (What happend to Remington?)
ORIGINAL: bigcountry I am not sure what you are trying to tell us? Are you trying to say just because you have a good working 11-87 then all of them should be perfect??:eek: Then you have obviously never worked in a quality department or calculated yield or failure rates for a product. SWT, how many have you owned? How many 700's have you owned? How many other types of guns have you owned? |
RE: Remington 870 Express (What happend to Remington?)
ORIGINAL: SWThomas ORIGINAL: bigcountry I am not sure what you are trying to tell us? Are you trying to say just because you have a good working 11-87 then all of them should be perfect??:eek: Then you have obviously never worked in a quality department or calculated yield or failure rates for a product. SWT, how many have you owned? How many 700's have you owned? How many other types of guns have you owned? You can't take your one product and apply it as a rule to all guns. |
RE: Remington 870 Express (What happend to Remington?)
ORIGINAL: bigcountry ORIGINAL: SWThomas ORIGINAL: bigcountry I am not sure what you are trying to tell us? Are you trying to say just because you have a good working 11-87 then all of them should be perfect??:eek: Then you have obviously never worked in a quality department or calculated yield or failure rates for a product. SWT, how many have you owned? How many 700's have you owned? How many other types of guns have you owned? You can't take your one product and apply it as a rule to all guns. |
RE: Remington 870 Express (What happend to Remington?)
It's not just necessarily a function issue. Look at the fit and finish, nothing like it was.
|
| All times are GMT -8. The time now is 04:18 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.