HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   Gun cleaning ???'s (https://www.huntingnet.com/forum/guns/228687-gun-cleaning-s.html)

game4lunch 01-23-2008 09:31 AM

Gun cleaning ???'s
 
Who make a quality gun cleaning kit?
I've seen some on T.V. where the rod appears to be coated with something.
I just busted another rod and am fed up with the "Wally World" brands of kits.



speyrjb 01-23-2008 04:43 PM

RE: Gun cleaning ???'s
 
at Cabelas you can get cleaning rods that are teflon coated to protect your barrell. I would recommend you stay away from bare stainless rods or the cheap aluminum rods.

Wayspr 01-24-2008 10:27 AM

RE: Gun cleaning ???'s
 
Any quality one piece rod will work far better than your previous rods. Some people like a coated rod and claim that they will not damage your barrel. Mine is a one piece uncoated stainless and have never had a problem. I would highly recommend that whatever you buy, make sure that the handle has bearings that allow the rod to twist naturally as you push it through the rifling. I normally buy most of my cleaning supplies from Midway. Here is the link:
http://www.midwayusa.com/ebrowse.exe/browse?TabID=6&Categoryid=8872&categorystr ing=10612***&utm_source=cleaningkitsleft&u tm_medium=homepage121

doubleA 01-24-2008 11:46 AM

RE: Gun cleaning ???'s
 
I personally like the coated Dewey rods myself, they will last a lifetime if cared for. I highly reccomend a bore guide also, Dewey, Outers/Gunslick,Stoneypoint all make them.

handloader1 01-25-2008 07:01 PM

RE: Gun cleaning ???'s
 
I gave up om kits and buy cleaning accesories individually. Good luck.

SJAdventures 01-25-2008 08:58 PM

RE: Gun cleaning ???'s
 
I have a Tipton Carbon rod and I really like it. I buy everything seperate and am not much on kits.

skeeter 7MM 01-25-2008 10:11 PM

RE: Gun cleaning ???'s
 
1 piece rod, bore guide and accessories individually as well. As far as a rod most of mine are coated Dewey's and they have been excellent. I just received my first Tipton Carbon Fibre rod this christmas. Either one IMHO is a darn fine choice and will last many years.

Ifeel a bore guide is a must! I have Dewey andBoretech Guides,equally pleased with both of these manufacturer's products.

All that is required is Bronze or Synth. bore brushes(No stainless steel), jag, solvents and patches (I cut mine out of t shirts, they can be cut to size for everything from my .17 to .58 cal.).

Badger Boy 01-25-2008 10:17 PM

RE: Gun cleaning ???'s
 

ORIGINAL: handloader1

I gave up om kits and buy cleaning accesories individually. Good luck.
ditto best kits are the ones you create for your style of cleaning...


All times are GMT -8. The time now is 02:03 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.