HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   browning a-bolt (https://www.huntingnet.com/forum/guns/227369-browning-bolt.html)

heinz57 01-15-2008 01:34 PM
browning a-bolt
 
removed my bolt from my 300wsm ...want to take the bolt apart ,clean the inside and check the fire pin ..does anybody have a diagram of the disasembeled bolt ...and how to take it apart..

bigcountry 01-15-2008 01:40 PM
RE: browning a-bolt
 
You can't do it like a 700 or sako 75 bolt. You need a tool to hold the spring back where on the 700, you can put a dime in the slot. I looked into this a while back. And Browning says send it back to them if you want to do that. I tried and tried to figure out how to make a tool to do it and gave up.

oldelkhunter 01-15-2008 01:47 PM
RE: browning a-bolt
 
You can't do it like a 700 or sako 75 bolt. You need a tool to hold the spring back where on the 700, you can put a dime in the slot. I looked into this a while back. And Browning says send it back to them if you want to do that. I tried and tried to figure out how to make a tool to do it and gave up.
I read somewhere the procedure to do this and didn't bookmark it.. ANyway i have since given up on it and have never had a problem with one of these anyway so if the bolt ever starts acting up I can send it to Browning or to my local Gunsmith who used to work for Browning and "SHould" know how to take it apart. ANyone ever find the procedure let me know.

heinz57 01-16-2008 08:58 AM
RE: browning a-bolt
 
took my bolt out and removed the spring tension [by inserting a pin on the bottom of the bolt ] bulled back and unscrewed the bolt ..cleaned and oiled my fire pin spring and pin ..almost as simple as my remington mod.700


All times are GMT -8. The time now is 04:29 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.