HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   Is the Encore rifle frame the same as the pistol frame? (https://www.huntingnet.com/forum/guns/226401-encore-rifle-frame-same-pistol-frame.html)

dhacker 01-09-2008 09:07 AM

Is the Encore rifle frame the same as the pistol frame?
 
I am sure this is a dumb question but I have no idea. I assume it is not, but it would be great if it was.

Thanks for your input.

Don

bronko22000 01-09-2008 09:15 AM

RE: Is the Encore rifle frame the same as the pistol frame?
 
Yes - it is the same frame. The only difference is the butt stock vs the pistol grip and the forearms are different for the rifle barrels. But remember, to comply with BATF regs you cannot put a barrel less than 16" on the frame with the butt stock installed. If you already have an Encore pistol, all you need to buy is the butt stock, forearm, and rifle barrel of your choice of caliber.

glockman55 01-09-2008 10:57 AM

RE: Is the Encore rifle frame the same as the pistol frame?
 
How about the older Encore rifle, will the Pro Hunter barrels fit on the Encore frame?

dhacker 01-09-2008 11:06 AM

RE: Is the Encore rifle frame the same as the pistol frame?
 
I have read that the Pro Hunter barrels will fit the Encore.



HEAD0001 01-09-2008 02:31 PM

RE: Is the Encore rifle frame the same as the pistol frame?
 
Yes, and Yes to the second question also. Tom.

retrieverman 01-09-2008 02:47 PM

RE: Is the Encore rifle frame the same as the pistol frame?
 
There are no differences in the frames, but if I understand the "law" correctly, a frame that is "registered" as a rifle can not be legally used as a pistol and vice versa. Unless someone runs the serial numbers, who is going to know though?

Bandhunter 01-09-2008 03:28 PM

RE: Is the Encore rifle frame the same as the pistol frame?
 
The frames are not registered at all. In fact you can purchased them seperately without a pistol, rifle or muzzleloader barrel. All encores are interchangeable as far as barrels and stocks are concerned. As mentioned before, it is illegal to use a rifle buttstock and a barrel less than 18" in length on the same frame. It is printed on the end of all rifle buttstocks. The Prohunter is just a newer version of the encore.

handloader1 01-09-2008 04:04 PM

RE: Is the Encore rifle frame the same as the pistol frame?
 
Contender barrels will not exchange with Encore barrels, and visa-versa. Good luck.

glockman55 01-09-2008 04:58 PM

RE: Is the Encore rifle frame the same as the pistol frame?
 

ORIGINAL: Bandhunter

The frames are not registered at all. In fact you can purchased them seperately without a pistol, rifle or muzzleloader barrel. All encores are interchangeable as far as barrels and stocks are concerned. As mentioned before, it is illegal to use a rifle buttstock and a barrel less than 18" in length on the same frame. It is printed on the end of all rifle buttstocks. The Prohunter is just a newer version of the encore.

The reason I asked is I see there are a few more options in barrel selection for the pro hunter. One more off topic question, do you think a 28" barrel wouldshoot better than a 24" barrel? in .243cal.

dhacker 01-09-2008 05:13 PM

RE: Is the Encore rifle frame the same as the pistol frame?
 
They do sell Encore pistol barrels so my assumption is that as long as I bought one of those barrels (not a contender) that it will work; correct?


All times are GMT -8. The time now is 06:28 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.