QR Scope Mounts
 

Dose anyone on here use or have you used Leupold QR scope Mounts? Im thinking about getting them for my Tikka T3 in 300 WSM. Here in pa i only need a 2x-7x or 3x-9x scope but when i go to my moms house and alot of the target shooting i do i would like to have a little more magnification. So i was thinking if they work well then it would be a good idea to use them. Whats every ones input on these?

RE: QR Scope Mounts
 

I haven't used the Leupold, but I have a couple sets of Talleys, they work great

RE: QR Scope Mounts
 

I second that on the Talley rings.

RE: QR Scope Mounts
 

I had a set of the Leupolds on a 30-30. They would come loose during the time I shot at the range. They did return to zero though.

Tom

RE: QR Scope Mounts
 

I haven't used the Leupold variety, but the Warne's I have work well.

RE: QR Scope Mounts
 

I use the Leupold QR rings on my 1895 Guide Gun and never have had a problem with them. If you do need to remove them they return to zero after reinstalling them. I have used Tally rings also with great results.

RE: QR Scope Mounts
 

I use Leupold QR mounting system. after 400 rounds through my 340 Wby. Mag. one base broke, but Leupold replaced it right away. Good luck.

RE: QR Scope Mounts
 

I use both the Leupold and Warne QD rings. Both work well, have never had any issues with them loosening. Return to zero is always acceptable, but I ALWAYS verify at the range.

It may be worth mentioning in case some are not aware, Leupold makes two systems. A QR base and ring system and they also make a QD ring. The QR system is a stand alone Leupold ring and base system. The QD rings are Weavers style base compatable.

RE: QR Scope Mounts
 

Yea i want the Leupold QR system. I guess ill have to get some bases done for my Tikka since Leupold dosnt make them. They make blank 2 piece bases that my gunsmith will have to drill for my Tikka. Thanks for everyones input.

RE: QR Scope Mounts
 

I use QRW rings, Leupold and Warne, on a few rifles with excellent results. Always have retained the zero when removing and returning the scope to the rifle.I think they're one of the best choices.