HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   ? about thompson center encore (https://www.huntingnet.com/forum/guns/197003-about-thompson-center-encore.html)

huntin4life 07-09-2007 12:33 AM

? about thompson center encore
 
can a t/c encore interchange rifle and muzzleloader barrels on the same frame or are there two different frames that need to be used? i was thinking of buying one sometime and just wasn't sure about this one thing. thanks

bigbulls 07-09-2007 07:19 AM

RE: ? about thompson center encore
 
Same frame but you will need two different forearms.

stalkingbear 07-09-2007 12:59 PM

RE: ? about thompson center encore
 
Encore,especially with the new rimfire barrels,is THE most versatile firearm you will get!!!!!!! All you have to do besides buying new forearm,is mount/sight in a scope for each barrel you own and everything will stay sighted in-EVEN after changing barrels. The main reccomendication I may make is oversize hinge pin to eliminate all play.

Dryridge 07-09-2007 02:05 PM

RE: ? about thompson center encore
 
The forearms on other barrels can be interchanged, however due to the ramrod hole the muzzleloader takes a different forearm from the others. Nothing else need be changed to use the ML. It even uses the same extractor as the rifles to pull the 209 primers out. Neat!!!

I have 3 frames and I can change barrels from frame to frame with consistent accuracy in all three. When I got my first one, I got a ML and .243 I mounted matching scopes/mounts on both. When I got them sighted in I shot a 3 shot cloverleaf w/.243 then swapped to the .50 cal w/3 pyrodex pellets and a Powerbelt and actually shot the .243 group right out of the paper. It is awesome having all barrels sighted the same, same scopes, etc. It just feels like an old ball glove when you throw it up. It fits, its comfy and whether shotgun, ML or rifle, It is litterally the same gun. I have stuff for handguns too. I can go from ML to handcannon in less than 5 minutes. Sorry, When I get on the subject of Encores I get a little carried away.

Good Luck finding you an Encore, You will Love It!!!

frontier gander 07-09-2007 02:31 PM

RE: ? about thompson center encore
 
over sized pin voids warranty. Something that sucks butt, but is sometimes needed to get the accuracy. Thats the big downfall.

huntin4life 07-09-2007 05:17 PM

RE: ? about thompson center encore
 
Thanks everybody. That is a load off my mind. I thought that I was gonna have to buy 2 different actions and that could get pretty expensive.

PaJack 07-09-2007 05:58 PM

RE: ? about thompson center encore
 
CAUTION: T/C ENCORESARE ADDITCING...

This should be marked on all Encore boxes!!!!!!!!!



All times are GMT -8. The time now is 06:20 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.