WANTED-COMPUTER EXPERTS
 

I am a long way from a computer expert, so I was hoping some one would figure this out for me. Here are the parameters.

The cartridge I am shooting is 6.5X284. The bullet is a Lapua Scenar. The weight is 108 grains. Sectional density: .221
Ballistic coefficient: .478 My Muzzle Velocity is approximately 3300 fps(not chronographed). I have the rifle zeroed at 200 yards. I was wondering if some one knows how to figure the ballistics of this load?

First I was wondering what the trajectory is with a 200 yard zero? Second I was wondering what my trajectory would be with a 300 and a 400 yard zero. Third I wonder how high I would be at 100 yards when I have a 300, 400, and 500 yard zero.

I am trying to determine what my scope settings should be at 100 yards so that I can dial in at 300, 400 and 500 yards. I realize there is no fast answer, and all settings will have to be shot at the bench. I am only trying to have some simple comparisons to begin with.

I have zero experience with computer ballistic charts, and I was hoping that someone has alot of experience with computer ballistics, and this would be a simple exercise for them? Thanks, Tom.

RE: WANTED-COMPUTER EXPERTS
 

here is easy ballistic calculator
http://www.hornady.com/ballistics/ballistics_calculator.php
100 zero -2.3@ 200 -9.1@ 300 -21.2@ 400 -39.7@ 500
65.5@ 600
200 zero +1.2@ 100-5.6@ 300 -16.5@ 400 -33.9@ 500
-58.5@ 600
300 zero + 3.1 @ 100 +3.8 @ 200 -8.9 @ 400 -24.4 @ 500
-47.1 @ 600
400 zero +5.3 @100 +8.3@ 200 +6.7@ 300 -13.2@ 500
-33.7@ 600
500 zero +8.0@ 100 +13.6@ 200 +14.7@ 300 +10.6@ 400
-17.8@ 600
600 zero +10.9@ 100 +19.5@ 200 +23.6@ 300 +22.5@ 400
14.9@ 500

hope this helps

RE: WANTED-COMPUTER EXPERTS
 

That is exactly what I wanted. Thank You, Tom.

RE: WANTED-COMPUTER EXPERTS
 

http://www.eskimo.com/~jbm/ballistics/traj/traj.html

There is the program I use to figure out my trajectorys when working up new loads. Works well for me, and its very simple.