mossberg 500a
 

howdy, i have an older model mossberg 500a and for the life of me cannot find a sling swivel for this shotgun. If anyone knows of a manufactorer that carriers a sling swivel attachment for this please help me out.
Thanks

RE: mossberg 500a
 

How does a 500A vary from a normal 500? I got mine at walmart, I am sure brownells or someone like that carries one though.

Paul

RE: mossberg 500a
 

Does your gun have the mag cap screw attached to the barrel?

Uncle Mikes makes a mag cap/sling stud kit for you shotgun.. they run about $30.

RE: mossberg 500a
 

ive got the same gun, uncle mikes makes a sling swivel kit for it it will run ya about 12 bucks.

RE: mossberg 500a
 

i have that gun also, just a longer barrel. still looking for sling swivel cap

RE: mossberg 500a
 

Mossberg 500A

RE: mossberg 500a
 

Oh, it's the tactical model. Didin't know that.

If you don't figure it out you can check out Shotgunworld. They have a tactical shotgun forum. I am positive someone there can tell you what you need to do to put a sling on that baby.

Paul

RE: mossberg 500a
 

i have emailed uncle mikes with no response as of yet. The tactical gun is not mine. I is a 12-ga pump (very old atleast 35 years old) barrel lenght is about 20" or so and i can shoot up to 3" shells. When you extend the pump out under there it says mossberg 500A?
it looks something like this
http://en.wikipedia.org/wiki/Mossberg_500

in regards to the caps for the sling at the end of the pump. I have one that screws into the magazine, kinda looks like a bolt, where most newer models have a cap that just screws out..this is the problem i have found in finding a sling for it..

any advice would be appreciated if you guys no of any web sites i can check that may have it...cabelas, basspro, and other major ones i have not found one on..
thanks

RE: mossberg 500a
 

The 'A' designates the gauge 'A' is for 12 ga 'B' is for 20ga and 'C' is for 410 bore.

RE: mossberg 500a
 

is the barrel lug drilled and tapped either on the center of the locking bolt or at the bottom of the lug? heres a picture with arrows pointed to where the barrel might be drilled and tapped for swivel mounting. if your gun is not drilled and tapped in these positions you will need to have it drilled and tapped in one of those spots or get the Uncle Mikes conversion set #'s 18102 and 18105

RE: mossberg 500a
 

heres a picture of the swivel set you will need if your shotgun is not already drilled and tapped for sling swivels. the red arrow points to the new locking bolt which replace the old existed locking bolt that is currently on the barrel

RE: mossberg 500a
 

order one from mossberg

RE: mossberg 500a
 

just wondering if you found something that would work for your gun? hope my posts helped ya out.