buckshot and choke selection?
 

i have never had to use buckshot while hunting until this year. what size choke tube would you guys use in a mossberg 500 12 gauge? full, xtra full or what?

RE: buckshot and choke selection?
 

Best way is to get afew sheets of cardboard or BIG paper and shoot 'em to see how you're particular gun does. Usually buckshot doesn't like to be choked too much. That may mean its does fine with a full choke or even better with a modified. You'll just have to find out. Are you using normal lead buckshot?

RE: buckshot and choke selection?
 

NC,

I've always had good results with an IC choke. Using 3 1/2 00Buck from Winchester or Federal, I can get four or five pellets on a paper plate at 50 yds every time. It is very effective on deer at this distance.

RE: buckshot and choke selection?
 

i am using a mossberg 500 so 3 1/2 is out. but i am using federal super x 3" 00 or 000 buck. i haven't patterned it yet but i have an ic choke in there now.

RE: buckshot and choke selection?
 

I agree with the choke selection. A full choke and #00 buck might be too constricting (not to mention scary! [&:])

For the tightest, I'd go with a modified choke. #00 buck and even #000 buck is some nasty stuff! Imagine twelve .32 caliber rounds all penetrating at once!

RE: buckshot and choke selection?
 

First, I will recommend that you get some butcher paper and set it up at 40 yards to see what really works for you. Then, I will say, buckshot works best with cylinder bore. Go to IC if you have to. It is not like a tall column of small birdshot that takes to shaping. The more choke, the more stringers you will get with buckshot.

But do your own test.

RE: buckshot and choke selection?
 

I use Buckshot with open choked shotguns myself, I use old realestate signs at 30m to pattern them. I also like SSG (18 pellet)over SG (9 pellet) buckshot.

RE: buckshot and choke selection?
 

IC go to mossberg website FAQ's

RE: buckshot and choke selection?
 

Modified