HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   remington 22 (https://www.huntingnet.com/forum/guns/122182-remington-22-a.html)

Nevadan 11-22-2005 12:56 PM

remington 22
 
I have a remington 22 that the accuracy has dropped in. It's bore is good and I don't think that stock is rubbing anywhere. The bolt to my knowledge has never been cleaned. I know that can cause reliability issues but could it also cause accuracy problems.

Nevadan 11-25-2005 10:52 AM

RE: remington 22
 
I think it is a model 582.

Hairtrigger 11-25-2005 12:16 PM

RE: remington 22
 
Does the barrel need cleaning?
Have the sights loosened?
Have the action screws loosened?

busyhunter56 11-25-2005 05:12 PM

RE: remington 22
 
I have a remington .22i think its amodel 582 pump. I really havent tried real hard to get it hitting right on. I was shooting a loose grouping at 25yds. but then again it could be me an not the gun, but i know when i used to shoot it more often it shot better than what it was over the summer. i dont know whats up with mine either


Nevadan 11-27-2005 12:28 PM

RE: remington 22
 
I have cleaned the barrel and it is not pitted or anything. The sites are tight and the action screws are also tight.

Before I could shot groups between 1/2 and 3/4 inches at 75 yards now I am lucky to get a three inch group at 50 yards. I have considered that I could have started a bad habit but I have no trouble with any other rifle.

I may have got the model wrong my rifle is bolt action.

It kinda happened suddenly not a gradual change, if that would give any ideas.

Hairtrigger 11-27-2005 06:53 PM

RE: remington 22
 
1/2 to 3/4 inches at 75 yards. I assume you are using a scope.
You could try another scope

Nevadan 11-27-2005 08:58 PM

RE: remington 22
 
I have shot it without the scope and it still would not group

superslam 11-28-2005 04:25 AM

RE: remington 22
 
Sure cleaning the bolt wont hurt but i dont believe thats the issue. i would say you need to get some lapping compound and and a good cleaning kit and see if that doesnt help. clean the bore with the cleaning kit first then try using the lapping compound then clean it again. i would almost guarantee thatthis will fix it.If not see if a local gun dealer has a air guage to test the rifling and the bore. Also what brand of ammo are you using.

Nevadan 11-28-2005 01:47 PM

RE: remington 22
 
I will have to try that soons as I get the chance. I use federal ammunition which has always worked for me good before.


All times are GMT -8. The time now is 11:07 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.