casing getting stuck in bore
 

i was shooting federal .22 #12birdshot shells today out of my 10/22. first they didnt have enough recoil to cycle the action but that didnt really bother me. i shot about 20 of these rounds with no problem then shot about 50 rounds of federal stinger. when i started shooting the birdshot again the casing was getting stuck in the bore after i shot it. i had to pry it out iwth a knife. i happened to look down the barrel and notice that these birshots were making my barrel filthy. anyone know that the problem could be? im gonna clean it tonight and try again tommorow.

RE: casing getting stuck in bore
 

noone can help?

RE: casing getting stuck in bore
 

well i have that problem it might be the shells are puttin to much power into it.might be to small so when u shoot they get slammed in the bore. but i really dont no

RE: casing getting stuck in bore
 

My best guess would be the chamber is getting dirty or something and they are haning up. Never messed with them though. I used to shoot shorts quite a bit though and never had any problems.

Paul

RE: casing getting stuck in bore
 

Yah, that is my best estimate too. Carbon in the chamber. Give it a good cleaning and see if it improves cycling. Try the easy stuff first. Good luck.

RE: casing getting stuck in bore
 

Quit shooting bird shot down the bore of a good 10-22 rifle. That stuff is best left to old single shots and revolvers.

Clean the gun snd shoot standard 22 rimfire lead ammo through it.

RE: casing getting stuck in bore
 

With the mixture of carbon,and the lube film on 22lr bullets makes a gummy substance.Then your #12 birdshot stick to it like fly paper.These type shells were orginally designed for revolvers and really not meant to use in guns such as yours. Not saying you can,t but why? They don,t shoot any distance anyway. As far as im concerned they are a waste of time and money. Your choice. So, thats what causes your problem. vangunsmith

RE: casing getting stuck in bore
 

yea ive came to realize after shooting that box that they are garbage and thats why they make shotguns. You guys think i did any damage to the barrel shooting these?

RE: casing getting stuck in bore
 

NOPE,for the lead is softer than your steel barrel.vangunsmith wouldn,t even worry about it.