25-06 now what gun maker
I dont like the browning or the savage any thing else is o.k under $750.00
|
RE: 25-06 now what gun maker
If your set on the .25 I would go with the .25 wssm
|
RE: 25-06 now what gun maker
What!!! Not a .243 zrex??? you slippin'??? Ohh, nope... I see you already made that suggestion on the other thread. You had me worried there for a minute....
|
RE: 25-06 now what gun maker
Here are a couple...
Remington M700 http://www.remington.com/firearms/centerfire/700bdl.htm Winchester Model 70 Sporter III http://www.winchesterguns.com/prodinfo/catalog/category.asp?cat=001C&offset=8 |
RE: 25-06 now what gun maker
ORIGINAL: renfrowridge I dont like the browning or the savage any thing else is o.k under $750.00 There's the Remington 700CDL which comes with a 26" barrel. I'd go with a Ruger bolt action, which I think comes with a 24" tube. I know here locally I can get the Ruger for approx. $525-$550. Rings are included, and no bases needed. Add a trigger job for about $40 (if needed), and you're set. |
RE: 25-06 now what gun maker
It all depends on what you want. Here are a few I would choose from.
$657 Ruger #1B 25-06 26" barrel $687 Ruger #1 25-06 26" barrel $569 Remington 700CDL DLX 25-06 24" barrel $749 Tikka T3 Stainless 25-06 22 7/16" barrel Good luck. |
RE: 25-06 now what gun maker
The 700CDL comes with a 24" barrel.
|
RE: 25-06 now what gun maker
I would have to go with the Remington. Good luck.
|
RE: 25-06 now what gun maker
ORIGINAL: zrexpilot If your set on the .25 I would go with the .25 wssm that .25 wssm sure its short action if that matters to you but according to exterior ballistics the 25-06 is superior to the wssm cartridge and after shooting the two I cannot tell a darn difference between the two except for the cost of ammo, 25-06 is quite a bit cheaper. |
RE: 25-06 now what gun maker
ORIGINAL: longrifle1000 It all depends on what you want. Here are a few I would choose from. $657 Ruger #1B 25-06 26" barrel $687 Ruger #1 25-06 26" barrel $569 Remington 700CDL DLX 25-06 24" barrel $749 Tikka T3 Stainless 25-06 22 7/16" barrel Good luck. Ive been a remington person for along time and will say you couldnt go wrong with a remington but you should give that tikka a gander those are a darn nice rifle. I dont know where Longrifle got his prices but in most gun stores you can get that tikka in blued and with a laminate stock for around or a bit under the cost of a remington CDL, im guessing longrifles pic is the stainless/laminate tikka?? just remember in the end your choice needs to be what you want not what everyone else says to get.... good luck |
RE: 25-06 now what gun maker
I have the Ruger with the 24 inch barrel. In the 25 caliber the 25-06 will out perform all but the 257 Weatherby. The 25 WSSM can't match the 25-06. I like the Ruger but it did need a trigger job. That added 45.00 to the cost but I got mine for 349.00 new. It had set in the store for a couple years so the offered me a pretty good deal.
|
RE: 25-06 now what gun maker
I have an older style tang safety Ruger in 25.06 I am quite pleased with. No experience with the newer Mark II they now market but have heard some do not like the triggers from the factory.
Good Luck |
RE: 25-06 now what gun maker
Ive been a remington person for along time and will say you couldnt go wrong with a remington but you should give that tikka a gander those are a darn nice rifle. I dont know where Longrifle got his prices but in most gun stores you can get that tikka in blued and with a laminate stock for around or a bit under the cost of a remington CDL, im guessing longrifles pic is the stainless/laminate tikka?? just remember in the end your choice needs to be what you want not what everyone else says to get.... good luck |
RE: 25-06 now what gun maker
Just been through the same dilema "which 25-06 to purchase"Seriously considered the Ruger No. 1,Wanted A Sako or Tikka but the 22 7/16" barrel was a draw back for me.Finally settled on a Savage 110 FP.Has a 24" barrel ,adjustable accu trigger and price was right.Only draw back for me was the ugly factory plastic stock,so I ordered a Bell and Carlson after market "drop in" with pillars in Olive with black spider web.
|
RE: 25-06 now what gun maker
I have owned/own several 25-06's.My first was a mkI ruger withe med-sporter barrel 26" and that gun was a shooter,traded it for some POS Marlin 450.
But since that I have owned 6 others,Tikka,Ruger,Remington and Winchester. By far I liked the Ruger-#1 and Tikka's,for accuracy and triggers the Winchesters in the Sporter LT have been good guns. I do like the looks of the Rem CDL,but I'm toying with the idea of buying one of those new Steven Mdl 200 in 25-06 just to try heck @ 279 bucks what can go wrong. For under 750 I would co with Tikka or the Ruger #1 BBJ |
RE: 25-06 now what gun maker
I would get a Ruger 77 Mk II. They are about $450 at walmart and they come with rings and have the intrical bases (one of the best systems out there). You will most likely need a trigger job but it will still total farless than $750. Ruger makes a great gun and in my experience with mine and my friends they are all very accurate 1" or less at 100 yards.
Here is a picture of my Ruger 300 WSM group |
RE: 25-06 now what gun maker
save your money, buy a savage and use the extra for a good scope.
|
RE: 25-06 now what gun maker
save your money, buy a savage and use the extra for a good scope. |
RE: 25-06 now what gun maker
I wonder why he doesnt like savage?? whats wrong with savage?? savage is my second choice to a remington
|
RE: 25-06 now what gun maker
I would pick the Rem 700 CDL-DLX.
|
RE: 25-06 now what gun maker
Just took the new Savage 110 FP in 25-06 to the range.AWESOME,3 shot groups touching at 100 yards with factory Federal 117gr. sierraloads!The rifle looks great with the new Bell and Carlson stock also.I will post some pictures as soon as I get them down loaded.:D
|
All times are GMT -8. The time now is 03:17 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.