Creating a spin/fly box
#1
Creating a spin/fly box
I do a lot of spin/fly and UL fishing so I created a box out of a Plano 3213. Very easy for anyone who wants to do it. I bought a foam refill from Cabela's and I already had an extra Plano box. Hopefully this helps someone.
Step 1
Sharpen the Knife and get it ready to cut out the tray dividers
Step 2
Cut it down as far down to flush as you can. The closer you get the easier the sanding is.
Step 3
Sand it down flush. Sanding will also help with the adhesive.
Step 4
Measure and make your templates.
Step 5
Transfer the template to the foam refill and cut it out.
Step 6
Make sure the foam fits in before you peel the adhesive back. Once it fits the way you want pull it back and stick it in
Step 7
Add flies and go catch fish
Step 1
Sharpen the Knife and get it ready to cut out the tray dividers
Step 2
Cut it down as far down to flush as you can. The closer you get the easier the sanding is.
Step 3
Sand it down flush. Sanding will also help with the adhesive.
Step 4
Measure and make your templates.
Step 5
Transfer the template to the foam refill and cut it out.
Step 6
Make sure the foam fits in before you peel the adhesive back. Once it fits the way you want pull it back and stick it in
Step 7
Add flies and go catch fish