Newer Mod. 70 win. in 30-06
#1
Spike
Thread Starter
Join Date: May 2018
Posts: 26
Newer Mod. 70 win. in 30-06
If anyone has a group improvement suggestion for this Mod. 70 made in S. Carolina and assembled in Portugal we're all ears.
My son's had a consistent poor group with all factory brands and weight possibilities available. He convinced Winchester to take it back and they replaced it with a - up-grade - , for whatever that's worth. In this instance not worth much as it doesn't shoot any better than the previous.
My son's had a consistent poor group with all factory brands and weight possibilities available. He convinced Winchester to take it back and they replaced it with a - up-grade - , for whatever that's worth. In this instance not worth much as it doesn't shoot any better than the previous.
#2
I have that rifle (Portugal) chambered in 30-06 in the Featherweight version. Mine averages app. 1.1" - 1.2" for five shot groups at 100 yards with handloads from the bench. The only thing I have ever done to this rifle is adjust the trigger. It is far from a target rifle, but it is a good hunting rifle. How large are the "poor" groups that your son has shot?
#3
Spike
Thread Starter
Join Date: May 2018
Posts: 26
#4
Nontypical Buck
Join Date: Feb 2003
Location: Warren County NJ USA
Posts: 3,899
dollar for dollar savage makes one of the best production rifles that most folks can afford ......... Winchester firearms changed so many hands they are are lost, Remington they went down hill over the last few years with poor quality control
#5
I have spoken with a couple of other guys with the same rifle and they were getting about the same results that I am getting. Perhaps it is the ammunition or some issue with the way the rifle is used on the bench. Are the groups fired using sandbags or a padded rest front and rear? How many shots are fired per group? Are the fairly good except for a flier? Are groups normally horizontal, vertical, or just scattered?
It is unlucky that you would get two lemons in a row when most other fellows are getting good results. People generally good products from Winchester (and Remington) in spite of what some claim on the internet. I hope you and your son get this sorted out soon. Do you handload?
It is unlucky that you would get two lemons in a row when most other fellows are getting good results. People generally good products from Winchester (and Remington) in spite of what some claim on the internet. I hope you and your son get this sorted out soon. Do you handload?
#6
I keep a notebook on every rifle that has details of all loading sessions and all range sessions. There is a note in the book for this rifle that says the barrel needs extra effort to clean copper deposits. That is not at all an unusual comment for a factory barrel. Perhaps a bit off elbow grease and JB cleaner will help.
#7
Spike
Thread Starter
Join Date: May 2018
Posts: 26
He has done his homework and it seems as if Winchester didn't do theirs. After sending one back with poor groups it seems as if Winchester would have at least grouped it before shipping. There is no reason a rifle new from the factory should need cleaning other than factory suggestions and there were NONE. So it sets in the gun cabinet looking nice and new and it's looking as if that's where it will stay.