Sims LimbSaver Barrel De-Resonator
#1
Sims LimbSaver Barrel De-Resonator
Has anyone used or heard anything about this product? I would like to use this on my Mini 14 and tightemn up the accuaracy without dropping big bucks on a new barrel. The concept makes sense to me but I have npot found any testimonials.
#4
Nontypical Buck
Join Date: Jan 2008
Posts: 1,320
For actual shooting I personally think they're a waste of money and worthless. They have one really good point tho. If you are using a two rifle gun case if you put one on the end of each rifle barrel it keeps the barrel of one from contacting the stock of the other.
The only way to tighten the groups on my old Mini14 was to sell it to someone else. Buy a different gun........
The only way to tighten the groups on my old Mini14 was to sell it to someone else. Buy a different gun........
#5
Nontypical Buck
Join Date: Aug 2005
Location: S.W. Pa.-- Heart in North Central Pa. mountains-
Posts: 2,600
A friend of mine has one on a 325 WSM Kimber. He says it works. Personally, I think there is something wrong with the barrel or bedding on a gun that this helps. It's changing the harmonics. But hey.....whatever...
#7
Fork Horn
Join Date: Feb 2003
Location: NY METRO AREA
Posts: 294
Seen it for sale but think its just a big waste of money. If Barrel harmonics are really such a problem you could just experiment and put a dollop of clear silicone caulking between your stock and barrel at different points or at more than one point and it should adjust your barrel harmonics far more agressivley and without any thingamajigs hanging off your barrel. You could even tie a five pound weight off the front of your barrel with a string and take a few shots off the bench to see if harmonics are truly a problem. Anything will technically alter your harmonics and where on the stock you rest your rifle while bench shooting can even make a differenc. However if you find one of your guns were to show such problems and harmonics really altered the guns POA to the point where a single pressure point in the stock couldn't cure it I think the best bet would probably be to get rid of it. Hope it helps.
#8
Typical Buck
Join Date: Aug 2005
Posts: 679
For actual shooting I personally think they're a waste of money and worthless. They have one really good point tho. If you are using a two rifle gun case if you put one on the end of each rifle barrel it keeps the barrel of one from contacting the stock of the other.
The only way to tighten the groups on my old Mini14 was to sell it to someone else. Buy a different gun........
The only way to tighten the groups on my old Mini14 was to sell it to someone else. Buy a different gun........
#9
Fork Horn
Join Date: Feb 2003
Location: Altadena CA
Posts: 494
"That's just a goofy gimmick that couldn't possibly work!" was my ignorant opinion... until I tried it. Darned if it didn't shrink the groups from my .308 Kimber Montana almost in half.
It's only 20 bucks, so give it a whirl. Buy it from Cabela's and you can always return it if it doesn't help.
It's only 20 bucks, so give it a whirl. Buy it from Cabela's and you can always return it if it doesn't help.