Scope Mounting Question
#1
Thread Starter
Join Date: Jan 2006
Posts: 8
Scope Mounting Question
Hello everyone,
I just bought a stevens model 2007mm Rem Mag. I ordered weaver #46 scope mounts and 1" scope rings with a quick detach. Well last night i was mounting the scope and noticed that the rings were about 1/4-1/2 inch too far apart. The scope is a bushnell sharpshooter 3x-9x-32mm. I talked to weaver and they told meI need to use the Weaver Dual Extension Rings product # 49061. Each extension saddle(bottom half of the ring) will move the scope 1/2" either direction. Does this mean thatI will need to buy new ringsalong with the extension?Any of you have this problem or have any inputs on this?
I just bought a stevens model 2007mm Rem Mag. I ordered weaver #46 scope mounts and 1" scope rings with a quick detach. Well last night i was mounting the scope and noticed that the rings were about 1/4-1/2 inch too far apart. The scope is a bushnell sharpshooter 3x-9x-32mm. I talked to weaver and they told meI need to use the Weaver Dual Extension Rings product # 49061. Each extension saddle(bottom half of the ring) will move the scope 1/2" either direction. Does this mean thatI will need to buy new ringsalong with the extension?Any of you have this problem or have any inputs on this?
#2
RE: Scope Mounting Question
No. You just get the extensions and replace the bottom half of the rings you have now. Another easy fix to this problem can sometimes be had if you know someone with a milling machine. Just mill another 3/16" slotacross one of the bases - either 3/8" forward of the rear one or 3/8" back of the front one - whichever gives the best eye relief.