HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Crossbows (https://www.huntingnet.com/forum/crossbows-76/)
-   -   Beware Barnett (https://www.huntingnet.com/forum/crossbows/424271-beware-barnett.html)

grouch55 10-23-2020 06:07 AM

Beware Barnett
 
This past week I noticed the string on my hand crank cocking device on my Barnett raptor pro xbow was fraying, I called Barnett and was put on hold, in meantime I went to web site, sent them a message requesting how to get a new string for cocking device, I am still waiting for a response on the email contact, Finally many hours later I did get a call back from a nice gal, Told her of what I need, She stated my Raptor was discontinued and they do not have any replacement strings !! This xbow is only approximately 5 years old !!!! You can get replacement parts for old washers and dryers, Cars ,Trucks, for a long time, Because of 2 shoulder and 2 back surgeries I really need the hand crank cocking device, She said she understands but nothing can be done, NO REPLACEMENTSTRINGS ! She said I can manually cock the xbow ! Very difficult for me ! So I may have to dump the xbow I like after only 5 years and purchase a new one, FOR A DAMN STRING< I also asked her for her supervisor, She said she had to email the supervisor and they would call me ! YEA Hows that working, ? Still waiting for a call !!!!! DISGUSTING SERVICE

Oldtimr 10-23-2020 12:21 PM

Take your cocking device to a good archery shop, they may be able to make a string for you. If not there are a couple of places below where yo can buy just the crank device, a lot cheaper than a new crossbow,\.


https://www.fieldandstreamshop.com/p...crnkdvcnvrsabw

https://www.ebay.com/p/4010166866

Wingbone 10-24-2020 01:49 AM


Originally Posted by Oldtimr (Post 4382695)
Take your cocking device to a good archery shop, they may be able to make a string for you. If not there are a couple of places below where yo can buy just the crank device, a lot cheaper than a new crossbow,

X1. The string for my Barnett was getting suspect after 5 years. I did just that. The shop had no problem replacing it.

Oldtimr 10-27-2020 11:38 AM

It would be nice of the OP updated his post regarding solving his problem without buying a new bow.

Marshall Law 10-28-2020 02:10 AM

I cannot remember what string is used for the crank but it's readily available and it's easy enough to replace. Google search should provide you that answer.
Barnett was purchased a long time ago and everything they make today is made over seas. You wont get much after the sale (in terms of service) from Barnett.

410001661 01-12-2021 08:55 AM

Best service I have ever seen has been from Excalibur - https://www.excaliburcrossbow.com/


All times are GMT -8. The time now is 06:09 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.