Excalibur question
 

My friend is going to buy a xbow he has a question I am not sure of the answer to.
He wants to know if he buys an Excalibur can he put an Accudraw on it with out major modifications?
Thanks Lee

RE: Excalibur question
 

I think you can but ask Catsclaw, evidently she had it done to a Phoenix.

RE: Excalibur question
 

Lee: Randy, aka 10 pt explained it all to me at one time, think there is like 4 or 5 holes you have to drill in the stock via a template and it will bolt right up. Not sure about where to put the gizmo that holds the claw though. It sits on a sheet metal lip up by the reciever under minor tension I think to keep it from flopping around while you aren't using it.

RE: Excalibur question
 

YES!!!!! An AcuDraw CAN be put on an Excalibur!!!! And Dan Miller does a FANTASTIC job on them!!!!!!!!

http://img.photobucket.com/albums/v281/catcando/excalbow.jpg

RE: Excalibur question
 

how do you shoot it after it is cranked? the claw piece is right where your hand grips the stock?:eek:
"dw"

RE: Excalibur question
 

Do it to it: No, the claw is above where your hand hits the stock, IOW, it makes no difference if you use anAccudraw, Crankeroo, or Rope cocking device. It does look like it would interfer in photo's but doesn't in actuality.

RE: Excalibur question
 

Thank you all very much. I will let him know. I used to build custom rifles and muzzle loaders and I still have some tools so we should be able to do it our selfs. Lee

RE: Excalibur question
 

when you purchase an accudraw, it will come with a template for the holes you need cut the cnter hole can be cut wit a 2 inch hole saw and arbor,, and the other holes can be drilled with a 9/32 and 5/8 drill bits now on the placement that I`m not sure of on an Excalibur but am sure you could make a best guess on that and you have to drill 6 holes total have youns purchased the Accudraw yet if not contact me via Pm I have one.. because I changed out my accudraw for and accudraw 50..

RE: Excalibur question
 

Lee, It can be done, but it takes some alteration of the trigger box as well I believe. Dan Miller is the best at it. Somebody here should have his number.
Randy

RE: Excalibur question
 

Lee: In case you haven't found it yet Danny can be reached at [740] 483-2312. Let us know how it goes.