Rocky Mountain Revolution 100 Broadhead
 

Does anyone shoot this broadhead? ( Rocky Mountain Revolution 100 Broadhead ) I was thinking about picking some of these up. I want to make sure I have this right, there is no rubber band holding the blades in place right? The collar system serves this purpose correct? Thanks


http://www.basspro.com/servlet/catal...0&cmCat=BEFREE

RE: Rocky Mountain Revolution 100 Broadhead
 

Phantombuck,I used the Revolutions for 2 years with great success. I switched to the Snypers last year but wouldn't hesitate to use the Revs. again. They do not have a rubber band but they actually have a black rubber o-ring that hold the bottom of the blade in to the collar. There is a groove in the collar and the bottom of the blades have little extensions that are over the groove and the o-ring slides over the extensions and hold them down in the groove. I never had one fail, and I killed 2 bucks, a doe, a coyote and a few groundhogs. They worked great for me.

RE: Rocky Mountain Revolution 100 Broadhead
 

If your worried about using an Oring, go to Rocky Mountain Gator heads. They come in 80 and 100 grain and have 2 free floating blades.

RE: Rocky Mountain Revolution 100 Broadhead
 

I also used these heads with great success. They flew great and I never had a failure. You shoulnd't have a worry in the world.