Go Back  HuntingNet.com Forums > Archery Forums > Bowhunting
 The Grand PVC Stand >

The Grand PVC Stand

Community
Bowhunting Talk about the passion that is bowhunting. Share in the stories, pictures, tips, tactics and learn how to be a better bowhunter.

The Grand PVC Stand

Thread Tools
 
Old 07-23-2004, 07:29 AM
  #1  
Nontypical Buck
Thread Starter
 
HAZCON7's Avatar
 
Join Date: Nov 2003
Location: Illinois
Posts: 1,704
Default The Grand PVC Stand

If anyone cares:

I finally have all the joints glued and screwed - took the better part of 3 days.
This thing is Rock Solid and SILENT!!

I was able to move and flip the stand over by myself (50lbs maybe?)
I climbed to the top and jumped around to test it out.
I still have to put the carpeted deck on, secure the steel guide wires, and paint.

For those that said it wouldn't be strong enough - it is.
and those that said it wouldn't be quiet - it is.
and those that said it was too expensive - well u were right there!

I should have the finished pictures setup at its semi-permanent residence by Monday.

HAZCON7 is offline  
Old 07-23-2004, 07:52 AM
  #2  
 
Join Date: Sep 2003
Location: Maine
Posts: 3,555
Default RE: The Grand PVC Stand

You should be a cabinet maker. It looks really good. What are you planning for paint?
adams is offline  
Old 07-23-2004, 07:54 AM
  #3  
 
Join Date: Nov 2003
Location:
Posts: 602
Default RE: The Grand PVC Stand

Looks great!! Now let us know how it holds up 2 yrs from now after the elements start attacking it. The sun is a beast on PVC. Any petroleum product (pvc) will weaken with constant exposure to the sun. Better get ready to paint that puppy every year if you want it to last.

Nonetheless.......good job!!!
GroundHunter is offline  
Old 07-23-2004, 07:56 AM
  #4  
 
Join Date: Nov 2003
Location:
Posts: 602
Default RE: The Grand PVC Stand

Also, on your horiz. bottom runs, shouldn't you have turned the 45's up instead of down? Seems it would have been stronger that way. I probably would have run those vertical braces back to the main post because that horiz. bottom brace is taking alot of load. You may want to add a kicker under each one of those.
GroundHunter is offline  
Old 07-23-2004, 08:07 AM
  #5  
Nontypical Buck
Thread Starter
 
HAZCON7's Avatar
 
Join Date: Nov 2003
Location: Illinois
Posts: 1,704
Default RE: The Grand PVC Stand

Good point on the kicker, might be something to consider before I finish it up. I had actually thought about those supports being upside down only after it was "too late" to change it. They should be pointing the other direction (top of and arch instead of bottom of an arch) but I built it upside down and overlooked it. There are a couple of minor flaws like that but really I'm just ready to get it finished and get it in position so the deer have as much time as possible to get used to it. But I might add those kickers! Thanks
HAZCON7 is offline  
Old 07-23-2004, 08:14 AM
  #6  
Nontypical Buck
Thread Starter
 
HAZCON7's Avatar
 
Join Date: Nov 2003
Location: Illinois
Posts: 1,704
Default RE: The Grand PVC Stand

For paint I was considering a handpainted rivers edge long grass pattern on the bottom half blending over a mossy oak on the upper half - but.... probably will just paint it black/grey
HAZCON7 is offline  
Old 07-23-2004, 08:24 AM
  #7  
 
Join Date: Feb 2003
Location: Warroad MN USA
Posts: 187
Default RE: The Grand PVC Stand

Is it just me or does that thing look like it belongs in a playground?

Or maybe the fun room at Mcdonalds

Really, it does look pretty good. Can't wait to see how it looks when you get it all painted up. Don't forget to sand it before you paint it or the paint won't stick very well.
NorthernMN is offline  
Old 07-23-2004, 09:25 AM
  #8  
 
Join Date: Feb 2003
Location: Shakopee MN USA
Posts: 1,001
Default RE: The Grand PVC Stand

I like to hear a report of how it works for you after season of use. Plus I'd like to know if it's also going to be quiet in weather of 30 degrees and colder. Looks really nice. Good job. I hope you glued all of those joints together in an enclosed area.
Stump_MN_Hunter is offline  
Old 07-23-2004, 09:55 AM
  #9  
Fork Horn
 
daystalker's Avatar
 
Join Date: Jul 2004
Location: I was born in a tree...
Posts: 446
Default RE: The Grand PVC Stand

like i said hazcon, if it gets to noisy your kids will love it for at least a year or two

let me know what kind of finish you plan on putting on it, i woudl try to get a clear coat or something like rustoleum, to protect it from getting rain in the joints. did you caulk the joints? or put extra sealer around them all?

good luck!
daystalker is offline  
Old 07-23-2004, 10:25 AM
  #10  
Nontypical Buck
 
extreme1's Avatar
 
Join Date: Feb 2003
Location: Ontario,Canada
Posts: 2,107
Default RE: The Grand PVC Stand

Hazcon7---just a thought---It might be a little expensive but why not try the camo duct tape,will last and help silent the stand down even more.

How high did you make it---looks like a neet project
extreme1 is offline  


Quick Reply: The Grand PVC Stand


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.