HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   Peep Alignment (https://www.huntingnet.com/forum/bowhunting/54765-peep-alignment.html)

SMartin28 03-02-2004 02:29 PM

Peep Alignment
 
On my Mathews LX, the peep sight keeps twisting. When at full draw I sometimes have trouble seeing my target and when I can, my arrow hits off my mark by 2 to 3 inches. Add that to my group shot of 2 to 3 inches - with this in mind my arrows sometimes hit 6 inches of my mark. Imagine shooting a deer and it drops 6 inches with the problem I am having. I use to use the self alignment peeps, but in my opinion there was to much "twap" of a sound after my shot (tubing hitting the string). I went to my pro shop and changed peeps from being held by a group of 3 strings to 2 and at times it still roatates to the point that when I look into it, the string is right in the middle. I really want to avoid the self alignment peep. Any suggetions would be helpful.

mez 03-02-2004 02:37 PM

RE: Peep Alignment
 
Do you still have the factory string on your bow? If you do change to a winners choice or other comperable custom string and it should take care of the problem.

Kanga 03-02-2004 03:39 PM

RE: Peep Alignment
 
I totally agree with Mez on this.

The Zebra strings are the worst I have come across for creep.

Get a good quality string and put on then install the peep after the string has been shot in.

Or be like me and do away with the peep altogether you really dont need it.;)

BOWFANATIC 03-02-2004 09:23 PM

RE: Peep Alignment
 
I've had alot worse strings than the zebra twists! Take your bow to the proshop and tell them whats wrong. They'll put in in a press and twist your string to get your rotation perfect.

dsheally 03-02-2004 10:52 PM

RE: Peep Alignment
 
Check out VaporTrailArchery.com custom strings. Have not ordered one
yet myself but from what I have read they are top notch strings. Actually
I just bought a Mathews Ovation and my factory string did roatate some
but is set now and does not rotate anymore. The bow has about 100
shots through it.

SMartin28 03-03-2004 07:03 AM

RE: Peep Alignment
 
I went Monday night to my pro shop and they did twist the string to compensate for the turning. I just hace to make sure the peep is inline before I draw.

Thanks for the replies and help.

Rack-attack 03-03-2004 07:05 AM

RE: Peep Alignment
 

On my Mathews LX, the peep sight keeps twisting
twisting is O.K.

It just has to twist to the right spot. On any string you buy you need to adjust and re adjust the peep to get it correct.

Your bow shop should be able to get it set up correct

PABowhntr 03-03-2004 07:09 AM

RE: Peep Alignment
 

quote:

On my Mathews LX, the peep sight keeps twisting

twisting is O.K.

It just has to twist to the right spot. On any string you buy you need to adjust and re adjust the peep to get it correct.

Your bow shop should be able to get it set up correct
I would agree. However, if you do adjust it and it continues to twist then the string is definitely issue. At that point I would replace it as suggested above.

jsasker 03-03-2004 07:50 AM

RE: Peep Alignment
 
Put on a NO-PEEP AND KISS YOUR TROUBLES GOOD-BYE;)

mrfritz44 03-03-2004 08:26 AM

RE: Peep Alignment
 
My only advice is don't use a cheap bow press while adjusting your peep...............it makes your finger hurt.


All times are GMT -8. The time now is 06:17 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.