New Trophy Ridge...Problem solved
 

For everyone that read my previous post about the problems i was having with my trophy ridge, it has all been fixed. I took the sight back and brought home an identical nitro extreme. mounted it, and it shows that the pins on the last sight were indeed "leaning left." I love this sight hopefully i can get it dialed in tomorrow. I'm going to put a couple spacers between the riser and the mounting bracket and I should be good to go. Thanks for all your help with the last post. Also I'm wondering how many hoyt shooters can see the whole sight ring at full draw, or if it is partially blocked by the riser.

RE: New Trophy Ridge...Problem solved
 

I had a trophy ridge flatliner on my hoyt mt sport and it was partially blocked, I put the
sight on my bowtech justice, not blocked at all.

RE: New Trophy Ridge...Problem solved
 

I had a matrix on a 03 magnatec and around a 1/4 of it was behind the riser. Glad you got your problem taken care of!!! Good luck!!!:)

RE: New Trophy Ridge...Problem solved
 

My RSR on my Matrix just begins to "touch" the riser as I'm looking down my "X".