HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   why is my bow getting (https://www.huntingnet.com/forum/bowhunting/40182-why-my-bow-getting.html)

buckmaster_88 10-16-2003 11:50 AM

why is my bow getting
 
why is my bow getting louder .??????????

JZarr 10-16-2003 11:53 AM

RE: why is my bow getting
 
Check to make sure nothing is loose.

I had the bolts for my quiver come loose while I was in Canada and my bow was extremely noisey until I tightened them back down.

Rack-attack 10-16-2003 12:01 PM

RE: why is my bow getting
 
From the information you have given – I would bet that it is the upper cross-axial support of the top idler wheel/cam. This support will often wear unevenly after switching from field points to broadheads. You need to buy a axial converter (they are very cheap) and shoot with that a few times and presto – No noise

:D

JZarr 10-16-2003 12:03 PM

RE: why is my bow getting
 
Check the flux capacitor while you' re at it. :D

buckmaster_88 10-16-2003 12:04 PM

RE: why is my bow getting
 
but I Bought it like a week and a half a go.It wasnt this noisy.

JZarr 10-16-2003 12:08 PM

RE: why is my bow getting
 
What kind of noise is is making and when it is making the noise?

This is like askng a mechanic " My car is making a funny noise. What is it?"

Need more info.

burniegoeasily 10-16-2003 02:20 PM

RE: why is my bow getting
 

Check to make sure nothing is loose.
JZarr is right. Check all screws to make sure they are tight. Before every hunt I check my screws in my sight guard, cable guide, quiver mount, etc, etc.. It only takes a few loose screws to cause a big noise.

peashooter 10-16-2003 07:37 PM

RE: why is my bow getting
 
How much have you shot it? Your string may have stretched, making the cam(s) go out of tune(yes, even a single cam bow will be out of tune). If the cam or cams are out of tune, they tend to make a bow louder. I would be willing to bet this is what happened. Take it to a dealer and have them put a couple twists in your string and/or cables if it needs it.

Then again, Rack could be right...:D

peashooter


All times are GMT -8. The time now is 04:29 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.