3-d target and carbons
 

Does any one have any suggestions? I shoot a Mathews LX with carbons and I just bought a new Makenzie 3-D deer. The problem being, I have to lay the deer down and stand on it to get my arrows out. Help please!

RE: 3-d target and carbons
 

You could try some of that silicon arrow wax....comes in a pvc tube.

RE: 3-d target and carbons
 

Go to the Bowhunting Gear Review Forum and check out the thread title something like " 3D + Carbon = Stuck Arrow"

RE: 3-d target and carbons
 

Rub the 1st 6" of the arrow shaft with soap or get some easy pull points

RE: 3-d target and carbons
 

An ivory soap bar works best!

RE: 3-d target and carbons
 

There is a product called " Woodys Arrow Lube" on the market.You can get it at most Archery shops,or you can order it from Lancaster Archery.Its the best stuff I have found,comes with its own applicator.Mine has lasted all year,including over 30 3-D shoots.It sales for around $12-$15.;)

RE: 3-d target and carbons
 

Hack apiece off you favorite bar of soap. I soap the first 2" and as yet to have a problem. Cheap easy fix!!!!

RE: 3-d target and carbons
 

Good question I have had the same problem but only with my carbon arrows I will try it out.;)

RE: 3-d target and carbons
 

I posted the question 3D + Carbon equall' s stuck arrow and I can tell you that the Ivory soap trick works very well. The only problem you have to rub it on every other shot or so. Not a big deal, I just rub the first three inches of my arrow. Give it a try.

RE: 3-d target and carbons
 

I went to a 3-D shoot for the first time last Sunday and I ran into the same problem. I tried using a little of my bowstring wax on my arrows and it helped a great deal. You might try that also.