blazers through WB
i bought some new arrows last year with blazers on them and acouple of them got tears in them i was thinkink of getting them refletched can i put an offset in them and still shoot them through a WB
|
I have shot them thru my wb and have for many years with no problems at all. Good Luck!!
|
My blazers were always tearing off when shooting though a wb, so I switched to a drop-away & problem solved. Maybe they weren't glued properly. I bought my arrows pre-fletched, so I don't know what kind of glue they used.
|
The WB and blazers go together like peanut butter and jam. If the blazers are ripping off there's two things that may be going on. Either the bow is out of tune and/or the glue didn't stick well on the blazers.
I've also been using the WB and blazers for several years without a problem. |
Blazers are the only vane I found that works with the WB. I had some issues with them tearing off, but that turned out to be in issue with how they were glued to the shaft. Once I got that worked out, no problems.
|
the Downside of WB's
Designed for newbies without a lot of treestand practice and archery hunting. Something hitting the arrow fletching on all shots has a downside.
Yanes come off of arrows, that why they sell fletchers. |
For anyone that shoots a WB, the Blazer vanes are a perfect match :)
Dan |
All times are GMT -8. The time now is 01:06 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.