Steel - Carbon Shaft Inserts
 

I saw advertised somewhere Steel - Carbon Shaft Inserts for FOC weighting.
Does anybody know where they are available?
Like these but steel.

Hi Rob,
Closest thing that I can find is steel adapters from Three Rivers:

http://www.3riversarchery.com/Produc...28&p=0&i=4226X

Thanks Kevin,
I already have them, they're only good for glue on's not threaded broadheads.

I keep several Brass inserts for different type arrows. I have even special made some for Crossbow bolts.

Many Crossbow shooters are missing the boat by not taking advantage of a high FOC on a Bolt. It will increase penetration, and shrink groups.

Dan

Why not use the brass Inserts Rob? What type of arrow you putting these In?

I guess I'll go with these from 3 Rivers:

Being that an arrow is out in all kinds of weather I would not want to use carbon steel as a material for an insert. If they were made of stainless it would be fine but not carbon steel.

Brass would be my choice. Brass is heavier so the weight is more concentrated at the tip. A steel insert would have to be longer to get the same weight and FOC.