![]() |
Interesting yes. Informative, not so sure. Why was the Limbsaver on the opposite end as the Bowjax? Were the two devices placed the same distance from the loop? He had a caliper but you don't know, a few 32nds could make a huge difference. You can't see what he is measuring because his hands are in the way. It looks to me like the Limbsaver is closer to the loop than the Bowjax.
I wouldn't make any purchasing decisons based on that random clip from YouTube. I would also add that you have a bow limb fixed in a vice at two ends, pulled in the middle and released. This is not how a bow limb works and these are not the same forces acting on a bow limb when the bow is shot. Even if the Bowjax really ourperfomed the Limbsaver in this test it is completely irrelevant. |
The test looks fairly accurate to me, and would have to skewed pretty bad to make that much difference. Vibration is vibration and I'd think the 6 arms on the Monster Jax would easily make them more effective. I bet you see some changes in Sims very soon.:wink: Like I said I used Limb Savers for years but after trying a set of Monster Jax I could tell a difference in my Bow that is the reason I now use the BowJax exclusively. Also the fact that their products has shown good durability, which has been lacking in some Sims products.
Dan |
Originally Posted by solocamcan
(Post 3552468)
Well now i am confused. The bow jax vid did only have limbs, while the limbsaver vid had the entire bow, so is it possible that limbsavers work best on a complete bow, not just the limbs, and vice versa for the bow jax???
|
You know I got a bunch of accelerometers at work we use for earthquake NEBs specs. I keep meaning to do this test with them. Which I am sure if the same test Sims did. Not very expensive, Just tape em on, and you have to have some analysis software to bring out the FFT.
I might try to rig up something in the next few weeks. Bowjax have a lot of mass, so I can see how they would be more effective in the first video. |
Originally Posted by bigcountry
(Post 3553601)
You know I got a bunch of accelerometers at work we use for earthquake NEBs specs. I keep meaning to do this test with them. Which I am sure if the same test Sims did. Not very expensive, Just tape em on, and you have to have some analysis software to bring out the FFT.
I might try to rig up something in the next few weeks. Bowjax have a lot of mass, so I can see how they would be more effective in the first video. |
| All times are GMT -8. The time now is 10:58 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.