Knowledgable truck guys....

Reply Subscribe

Thread Tools

10-12-2009, 09:46 PM

#21

byg

Spike

Join Date: Jul 2007

Posts: 99

Do you run the truck low on fuel alot? Might be your fuel pump getting ready to crap out. Mine wouldnt start until I cranked it about 2 or 3 times. Replaced it and starts fine now.

10-13-2009, 12:55 AM

#22

nromaker

Fork Horn

Join Date: Sep 2007

Location: kc mo

Posts: 101

sounds like all good advice but i would have your fuel pressure checked as stated above to ckeck you fuel pump. OR YOU COULD GET A NEW ONE FROM OBAMA MOTOR CORPORATION

10-13-2009, 05:56 AM

#23

byg

Spike

Join Date: Jul 2007

Posts: 99

If you wind up replacing your fuel pump(yourself),gets some buddy's and remove the bed its only a 15 min job once you can get at it....Oh yea, the bed is heavier than you think LOL....

10-13-2009, 07:35 AM

#24

baileym62

Fork Horn

Join Date: Sep 2009

Location: maine

Posts: 139

super g is right there are some cleaners that will not harm the sensors didnt mean it couldnt be dont just that to be carefull about what you use

10-13-2009, 07:39 AM

#25

baileym62

Fork Horn

Join Date: Sep 2009

Location: maine

Posts: 139

usally is a baro sensor built into the maf sometimes ive seen the maf readings to look normall so people think its ok but the baro is offt and is still the same part that needs attention. mostly seen it on the fords like ranger explorer but could be a pssiblity for anything i guess

10-13-2009, 02:34 PM

#26

lightfoot52

Fork Horn

Join Date: May 2009

Location: INDIANAPOLIS,IN.

Posts: 146

Quote:

Originally Posted by Muliefever

seems how it is a newer truck. It is not your plugs wires etc.. More likely to be a MAF sensor or a Throttle Position Sensor. He is what I would do, drive to you local autozone, they can hook up a diagnostic reader to your truck. Which should tell you what the problem is.

yes,what he said.most likely the t.p.s.

01-23-2012, 09:54 PM

#27

johnnyfreud786

Spike

Join Date: Jan 2012

Posts: 1

I have a ford truck which required some auto mechanics job for it’s better functioning. I want to know if you know any good auto mechanic company which can perform their job in cheap rates. As I am not a rich guy so cheap but little bit good quality in auto parts would be appreciated.

Auto Mechanics