Mathews Switchback Question
 

Is the roller guard supposed to be bent towards arrow or away?
I am tearing the crap out of my fletching which never happend before and I did take it to the bow shop to get tuned.

on my dxt im pretty sure its slightly bent in...i would guess the same for the switchback, but it might be different

Supposed to be bent inward towards the arrow. Check your centershot, if its too far inward, it could cause fletching contact.

If this isn't the case, try rotating the arrow to provide more clearance.

O.K. I am definetly hitting the roller cable gaurd. I used some baby powder on my vanes and the end near the rollers was covered in powder, I switched to **** feather down and no dust at all.
Should I just shoot **** feather down or should I have it tuned AGAIN?