TFOX

I would suspect either a limb issue or bent riser.There is also a possibility of the shims being istalled improperly and putting the cam too close to the limb.

hoyt919

well they already replaced the shims and cams. Now they sent back new limbs to the hoyt dealer and they put it on. Just got it back today and it still does the same thing. I called hoyt and told them, tried to get a new bow or something cause I am sick of these problems.... Here is a pic of the cam with the chip off it again. Cant get any other pictures of the bow that look have decent.

TFOX

Lay a straight edge on the limb pockets and see if they seem to be running with each other or if there is a noticeable change in the pockets from the straight edge.

TFOX

1 more thing,are there shims installed on that side of the cam?

hoyt919

Okay thank you. I'll give that a shot tomorrow and post how it goes. I will check the shims to and see what we got.

d_toll85

Did you get it figured out? Kinda curious to the fix as a friend is having the same issues with his vectrix.

hoyt919

Sent it back to Hoyt for a final time. I will let you know as soon as I get it back