hardcorehunter

Thanks for the info

JoshKeller

I am seeing around 86 ft lbs of KE with mine at 62 lbs, and 95 ft lbs at 70 lbs

I just put some trimmed cat whiskers on the string and it made a huge improvement.

hardcorehunter

Would u guys with '08s and '09s post some pics so I can see the difference in the roller and the factory sts, as well as your after market sts? Thanks. I got the '08 and it will be here later in the week and I want to see the difference in the 2 years and want to see the after market stss u guys put on.

allmightyhunter13

sounds like a good bow!

drockw

101st. Its the exact same thing as the 82nd though, as far as the sts and the roller and riser.

Mine is a string tamer jr.


Derek

hardcorehunter

What's up with the end of the string tied to the rest..is that a limb driver installed?

pheasantfanatic

Here is my '08 82nd.....

hardcorehunter

pheasant...is that a stock bow? So what is your rest?

hardcorehunter

Now I see the difference in the 08 and 09. Here is the 09 from the bowtech website. So Greg MO says I can order the 09 cable guide and install on my 08..this is what I will do...I will do away with the factory string stop and put a MeanV on....pheasant..anybody else. I assume the MeanV goes directly behind the stabilizer where the Bowtech emblem is?

pheasantfanatic

Yes, that is a stock bow. However, since I took that picture, I have added string leeches and LimbJax from BowJax. I am hoping to get a String Stopper to mount in the rear stabilizer hole. I bought one, but the wrong one was sent and was too long for the brace height. The rest is an HHA TN-2000, but I just recently traded it and am putting a Limbdriver rest on the bow. Hopefully I get it in the mail today!!