HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   Matthews hits 360FPS (https://www.huntingnet.com/forum/bowhunting/273242-matthews-hits-360fps.html)

buckmaster 11-12-2008 07:55 PM

RE: Matthews hits 360FPS
 

ORIGINAL: MN/Kyle


ORIGINAL: buckmaster

Just so you Know I didnt just "Here" this through the grapevine. I saw an add in a dealers magazine.
lol:D
Well Krap.

bigbulls 11-12-2008 09:08 PM

RE: Matthews hits 360FPS
 
Mathewsdefinetly makes ahigh quality bow and we sell a bunch of thembut if a Mathews bow achieves advertised IBOspeedsset to real IBO specs, not the little "* approximate" disclaimer specs in their magazine ads, I will bend over and kiss my own arse.

Single cam, dual cam, binary cam, or triple or quad cam...... I have never seen a Mathews bow reach speeds that they claim.

my7pointmonster 11-12-2008 09:20 PM

RE: Matthews hits 360FPS
 
its like that Banelli Commercial.

Boom
Boom
and
Boom....

The general was bad for it and now what just wait till these 360+ bows start blowing up... When will it end???

Ryan.

cave62 11-12-2008 09:29 PM

RE: Matthews hits 360FPS
 
Whats wrong with Benelli?

Black Stick 11-12-2008 09:30 PM

RE: Matthews hits 360FPS
 
As an 82nd guy, I'm not liking what I'm reading. Seriously. I can only hope that this is a bad dream.

kodiakhuntmaster 11-12-2008 09:31 PM

RE: Matthews hits 360FPS
 
I seriously doubt that the average guy can get those kinds of speeds.

Show me a bow that gets 360fps with a 28" draw lengthand withdecent weight arrows and a normal working guy can afford and I'll eat my hat.


... The tobasco sauce is ready just in case...

Mikey S. 11-12-2008 09:33 PM

RE: Matthews hits 360FPS
 
PSE has a single cam bow out for 09 that pushes 330 IBO. It's called the Bowmadness XL I believe.340 is definitely possible.

Black Stick 11-12-2008 09:35 PM

RE: Matthews hits 360FPS
 
Why!!!!!!!!!!!!?

bigbulls 11-12-2008 09:38 PM

RE: Matthews hits 360FPS
 

Show me a bow that gets 360fps with a 28" draw lengthand withdecent weight arrows and a normal working guy can afford and I'll eat my hat.
They never will. That is why they call it IBO specifications...... It's a standard measuring system for bows.....which is a 30" draw length, 70 pound bow shooting a 350 grain arrow. Obviously if you have a shorter DL, shoot less than 70 pounds, or shoot a heavier than 350 grain arrow you will not achieve these speeds.

The problem is that Mathews, as well as a bunch of other bow manufacturers,is notorious for fudging their DL numbers and DW numbers in order to make their bows look good in their ads.

Schultzy 11-12-2008 09:41 PM

RE: Matthews hits 360FPS
 

ORIGINAL: TEmbry


ORIGINAL: nissan300ztt

I dont know I dont believe its possible with 70# draw maybe with 80# and 65% let off...thats the only possible way. Unless they are using some freakishly new HUGE cam design. Single cam cannot product those speeds. I would imagine its gonna have the limb flex of the PSE X-force, and like mathews famous SOLOCAM I dont know im pretty skeptical I think why Block makes a 400FPS target isnt for mathews its because of the DESERT STRYKER by bowtech 405FPS.

BELIEVE NONE OF WHAT YOU HEAR AND HALF OF WHAT YOU SEE
Dude, I honestly don't know where your posts come from
Your not the only one Trevor!!;)


All times are GMT -8. The time now is 04:23 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.