RE: I can shoot 1 pin out to 60yds.
 

Very true.

Or of course... that one pin could move....but I think we all know what the commercial means. Theorhetcially, my spelling is inaccurate, but more to the point, if you had it hitting 2-3" high at 20 yards and were shooting a light arrow with almost no offset or helical in your vanes, you'd probably be about 2.5-3" low at 40 yards if you were shooting faster than 320.

Could you do it and be "minute of deer"..... yes you could. Is minute of deer good enough for most of us on this site? Absolutely not.... but speed sells bows... PSE does that pretty well.

RE: I can shoot 1 pin out to 60yds.
 

At what distance is he sighted in dead on for?

RE: I can shoot 1 pin out to 60yds.
 

When I think of shooting one pin to X number of yds I think of flat trajectory (sp)? I shoot one pin out to 27 yds exactly without having to do anything. No holding high or anything. I can shoot the same pin from0 to 27 yds and hold it the same. When move to 30 yds-31 yds I have to hold that same pin about 2 in high to hit the center.

RE: I can shoot 1 pin out to 60yds.
 

That's not entirely true, either, VA:D

You're not shooting flat to there. You're probably shooting flat (no fall) for less than 15yds.

(but I get what you're saying;))

RE: I can shoot 1 pin out to 60yds.
 

im sure he can, one pin sighted in at 30 yards,my sight works 20 pin and 30 pin, 20pin=0-28..30pin=28-40

[Deleted]
 

[Deleted by Admins]

I can ride my bike with no handlebars
 

I work with 2 people who are avid bowhunters that claim their bows are flat to 40:D:D:D

That is a pet peeve of mine! Not possible and must be a macho thing!

RE: I can shoot 1 pin out to 60yds.
 

We use guns for that.:eek:

RE: I can shoot 1 pin out to 60yds.
 

I shot in the finals of the "King of the Mountain" 3D competition at the Denton Hill PA Bow Festival on Sunday and the guy I shot against (The champion for the last 4yrs) had one of these set ups withan X-Force shooting 344fps (31", 70#)

And boy was that thingfast.......[:-]
He was a good shooter and pretty accurate with it for the most part.
Just not accurate enough to make it 5 in a row.
;)

RE: I can shoot 1 pin out to 60yds.
 

Yeh you know what I mean Jeff, I just shoot one pin from 0-27 yds without having to hold the bow any differently. Pass that point I have to change, so if I were to shoot multiple pins, I would put another pin in the site at that point. Also, for someone who said their friend is looking to shoot a deer at 90 yds this year....why?? isn't the point of bowhunting to get them close to make a clean shot? I mean that's great if ha can shoot that far, but I think the deer deserve a bit more than that. I mean what's the point in tryin g to kill one that far??