|
RE: Things I have learned about Rage BH
I too use the rubber bands to prevent premature deploymentation.:D That's a good idea about the oil though. I'll have to get some scent free oil and try that.
Damien, if nobody takes you up on those Rages I'll take them off your hands. |
RE: Things I have learned about Rage BH
ORIGINAL: HuntingBry I too use the rubber bands to prevent premature deploymentation.:D That's a good idea about the oil though. I'll have to get some scent free oil and try that. Damien, if nobody takes you up on those Rages I'll take them off your hands. |
RE: Things I have learned about Rage BH
ORIGINAL: Germ Well last year I shot a doe with one, it was the biggest hole I have seen. The most blood I have ever seen on a trail. Even though I see the deer go down. Like most things they need to be taken care of, so I did a test. I put a lot oil on 4 of by rage 2 blade BH, I left one without. The four with oil I just looked at and they are ready for service, blades still shart and O-ring in good condition. The one without was not so good, I had to touch up the blades and the o-ring was rotten. I like the rage and I am going to use them, I suggest those who do use them to inspect them after a long sit. A little non-scented oil goes a long way;) |
RE: Things I have learned about Rage BH
ORIGINAL: Germ ORIGINAL: HuntingBry I too use the rubber bands to prevent premature deploymentation.:D That's a good idea about the oil though. I'll have to get some scent free oil and try that. Damien, if nobody takes you up on those Rages I'll take them off your hands. |
RE: Things I have learned about Rage BH
Germ, I have heard the hole left by them is so large that bloodcrick could stick one(just one) of his enourmously fat fingers in the wound channel. You have seen both can you confirm this??
>>>BAM<<< ORIGINAL: Germ Well last year I shot a doe with one, it was the biggest hole I have seen. The most blood I have ever seen on a trail. Even though I see the deer go down. Like most things they need to be taken care of, so I did a test. I put a lot oil on 4 of by rage 2 blade BH, I left one without. The four with oil I just looked at and they are ready for service, blades still shart and O-ring in good condition. The one without was not so good, I had to touch up the blades and the o-ring was rotten. I like the rage and I am going to use them, I suggest those who do use them to inspect them after a long sit. A little non-scented oil goes a long way;) |
RE: Things I have learned about Rage BH
Tuco lets not get crazy here, I would say his pinky finger:D
|
RE: Things I have learned about Rage BH
Si~
>>>BAM<<< |
RE: Things I have learned about Rage BH
Here's what I have learned about Rage BH's. With all the talk of using O-Rings and WD-40, I think I'll stay with my Muzzy fixed blade heads!:D
|
RE: Things I have learned about Rage BH
ORIGINAL: early in Here's what I have learned about Rage BH's. With all the talk of using O-Rings and WD-40, I think I'll stay with my Muzzy fixed blade heads!:D |
RE: Things I have learned about Rage BH
If I'm not mistaken, Jeff mentioned using it in post #10.;)
|
| All times are GMT -8. The time now is 08:33 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.