inserts???
Does anyone glue their inserts to the shaft? I have been shooting Thunderheads into a Morrell Yellow Jacket block. I recently lost 2 heads that slipped off due to the insert upon removing the arrow from the target. So yesterday while shooting, I lost another. I decided to break the foam down and I had a total of 5 broadheads inside. Is this common? Most of the time I shoot Gold Tip arrows. I think I read somewhere that you do not glue the inserts in, is this correct?
chris |
RE: inserts???
I have always glued my inserts in. I am suprised that you only had 5 BHs in there.
|
RE: inserts???
i always glue in my inserts
|
RE: inserts???
I can't imagine not gluing my inserts.
|
RE: inserts???
Thanks guys, I do not know why I have not glued them myself. First thing to do when I get home today.
chris |
RE: inserts???
ORIGINAL: txjourneyman I can't imagine not gluing my inserts. |
RE: inserts???
LOL I always glue them in.
|
RE: inserts???
What type of glue do you all use for carbon arrows? I used the heat activated glue stick and mine pull out in the foam from time to time as well. I am thinking of using the two part epoxy to see if that will hold better.
|
RE: inserts???
I heat up the insert then take a glue stick melt some on there and put it in the shaft.. Don't over heat the insert or else the heat will damage the shaft. I have never had an insert come out.. yet.
|
RE: inserts???
I also always glue mine.If you go to the arrow manufacturers websiteit will usually tell you how to prepare shaft and which type of glue to use.
|
All times are GMT -8. The time now is 07:53 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.