Installed wrong or right...help? (PIC)
 

I gota new limbsaver cable slide to hold my cables closer and to speed up the bow a little. Is this intalled right?

PS: I know my stings/cables are bad I am in the market for new ones

RE: Installed wrong or right...help? (PIC)
 

[&:]I have no idea...but I thought I would put it back up the top for you so one of the more knowledgeable people on here would notice the post

RE: Installed wrong or right...help? (PIC)
 

Thanks...it just doesnt look right for some reason...maybe it is?

RE: Installed wrong or right...help? (PIC)
 

anyone?

RE: Installed wrong or right...help? (PIC)
 

I guess it looks right...mines a bit different, but man you do need a new string....now that I look at it...it looks like it might be upside down[&:]not sure though get a proffesionals opinion....

RE: Installed wrong or right...help? (PIC)
 

pull your slide off and see how and where your cables cross than line up your slide so that the front cable (the one closest to your arrow) is in the longer slot on you slide than reinstall your slide back onto your cable bar. You will have to disconnect your rest pull rope in order to do this.

RE: Installed wrong or right...help? (PIC)
 

Bowtechs cross above the cable guard. As long as they aren't crossed and rubbing it should be right

RE: Installed wrong or right...help? (PIC)
 

Hmmmm....I am going to try to get to a shop today maybe.

RE: Installed wrong or right...help? (PIC)
 

it looks upside down to me have you tried it the other way with the cross below?

RE: Installed wrong or right...help? (PIC)
 

What Bowtech is it? My Guardian crosses above the cable slide so it looks right to me.The cables should be close but not touching.

RE: Installed wrong or right...help? (PIC)
 

This is a 07 Ally...I think it may be upsidedown

RE: Installed wrong or right...help? (PIC)
 

Ok...I'm pretty sure the allegiance crosses below the cable slide. If that is the case, then you do have it backwards.

http://www.bowtecharchery.com/allegiance.php

From the looks of it yours is backwards.

RE: Installed wrong or right...help? (PIC)
 

DAMN! Good thing I dint shoot it yet...I am getting new strings any ways. Thanks for the help...I wish I had a press though too [&:]

RE: Installed wrong or right...help? (PIC)
 

Yea...Look into getting one of those potable ones from Bass pro. They are only $40. Then when you get new string you can put em on yourself. Or if you ever have a problem in the woods you have it with you. If you dont trust yourself I'm sure a shop will put the strings on for $10 or less.

http://www.basspro.com/webapp/wcs/st...=SearchResults

RE: Installed wrong or right...help? (PIC)
 

If it's an Allegiance then the cables should cross in the center of the bow (below the cable guard) and the slide should be on so that they don't touch each other.

[Deleted]
 

[Deleted by Admins]

RE: Installed wrong or right...help? (PIC)
 

Sorry I goofed....but yes the ceter pivot bows cross above the cable guard and the rest cross below the cable guard

RE: Installed wrong or right...help? (PIC)
 

These guys are correct.. The cables should cross below the cable slide on a 2007 Allegiance. The longer slot on the slide needs to face forward.

RE: Installed wrong or right...help? (PIC)
 

Yeah, I agree that you have it backwards. I had one on my 06 Tribute when I sold it and was thinking yours looked wrong, but that was a while ago- I wasn't absolutely sure.