![]() |
82nd issues = not user error
As a some of you know, I've experienced a barrage of issues with my 82nd. Today was kind of a relief... I contacted Bowtech on Monday and spoke for a lengthy amount of time with them regarding my "issues." I explained everything I'd done and everything that was happening. He told me to take it to a retailer here in OKC that had some kind of Bowtech certification, meaning that they had been to Bowtech and attended classes regardingBowtech bows. I happen to know (pretty well) one of the guys that attended the classes. Upon his first draw of the bow, he looked at me out of the corner of his eye and snickered. His next phrase was "uh, this thing has problems. You better leave it here." So I left the bow with him and he called me back a couple hours later and said he checked everything (yes Germ, even the cam timing on a draw board) and had no solutions. He called Bowtech (first his Rep)and they told him to send the bow back.
I was pretty happy to know that it wasn't me, yetstill disappointed. While I was in there, I made a special Hoyt order... A Hoyt Katera, 29" draw with 70lb limbs :D:D:D. I'm thinking about keeping the 82nd, if it gets fixed or replaced... but the more I read about people having similar issues, the less I'm impressed. |
RE: 82nd issues = not user error
Glad you got it taken care of. Sorry to hear all the problems you had. I know alot of guys who have them and have not had a lick of trouble yet. Good luck with your Hoyt!
|
RE: 82nd issues = not user error
ORIGINAL: twildasin Glad you got it taken care of. Sorry to hear all the problems you had. I know alot of guys who have them and have not had a lick of trouble yet. Good luck with your Hoyt! |
RE: 82nd issues = not user error
Good to know that's it's being taken care of. I hope you have good luck with our hoyt.
|
RE: 82nd issues = not user error
thats good then, sort of
|
RE: 82nd issues = not user error
ORIGINAL: Dubbya ORIGINAL: twildasin Glad you got it taken care of. Sorry to hear all the problems you had. I know alot of guys who have them and have not had a lick of trouble yet. Good luck with your Hoyt! |
RE: 82nd issues = not user error
Good man, finally coming back to your senses....The darkside almost had ya huh? lol
Hopefully you have better luck with the Katera. |
RE: 82nd issues = not user error
So you're getting your problem resolved for the 82nd and are getting a new bow? That sounds like a pretty good deal to me! I hope you have better luck with the 82nd.
|
RE: 82nd issues = not user error
Congrats and Congrats
. |
RE: 82nd issues = not user error
Man, and here I just thought you were bonkers.....:D Glad you're getting that worked out bro.
|
RE: 82nd issues = not user error
Glad you are getting taken care of, I would hope they give you a new bow over fixing it.
|
RE: 82nd issues = not user error
So what were/are the issues? You had to press for actual answers and not just nod and say..ok. What was actually wrong with the bow??
|
RE: 82nd issues = not user error
Hey don't get lippy with me, LOL I would have told you to buy a GTO:D
|
RE: 82nd issues = not user error
I was told they were all user error.
For the record....my D-loop still won't stay seated.;) |
RE: 82nd issues = not user error
ORIGINAL: GMMAT I was told they were all user error. For the record....my D-loop still won't stay seated.;) |
RE: 82nd issues = not user error
ORIGINAL: txjourneyman ORIGINAL: GMMAT I was told they were all user error. For the record....my D-loop still won't stay seated.;) Use the old ones to floss your cats teeth! |
RE: 82nd issues = not user error
tx.....I've had 4 shop techs tie it on......I've tied three on there myself. It stays put, now.....ONLY because the top know IS secure. The bottom know still spins.....but is kindaa non-factor.
Yes. I use BCY material. Yes....The 4 shop techs and I know how to tie a D-loop....lol. |
RE: 82nd issues = not user error
ORIGINAL: GMMAT tx.....I've had 4 shop techs tie it on......I've tied three on there myself. It stays out, now.....ONLY because the top know IS secure. The bottom know still spins.....but is kindaa non-factor. Yes. I use BCY material. Yes....The 4 shop techs and I know how to tie a D-loop....lol. |
| All times are GMT -8. The time now is 01:30 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.