Arrow shafts ( am i doing something wrong ???)
 

ok so i go to easton web page and check there arrow chart and it tells me that i need 2514 shafts ( whichis what i am useing ) either in xx75 or xx78 superslams ..... ok so now i look at there range of arrows and the super slams are now called super slams digital and sized by 300, 320 etc etc so which do i need am i not seeing a conversion chart somewhere ???

RE: Arrow shafts ( am i doing something wrong ???)
 

You need to know your point weight and whether you are shooting a medium cam or single/hard cam (compund bows obviously). Then go down that column until you get to your DW and then go right until you get to your DL and that will give you your "group". Once you know your group look in that box to get your spine.

Or you can put that info here and someone can look it up for you.

RE: Arrow shafts ( am i doing something wrong ???)
 

Spine of the 2514 is .305

Dan

RE: Arrow shafts ( am i doing something wrong ???)
 

Yep. You need the 300's.

RE: Arrow shafts ( am i doing something wrong ???)
 

ok so the new numbers are the spines ok cool thanks

RE: Arrow shafts ( am i doing something wrong ???)
 

ok and again on this subject just spent ages on the phone ringing stores over here and no one stocks my size arrow damm anyone know of a good store that will ship to england and will have a good supply of stock i need other stuff as well you wont believe how hard it is to get the stuff you want here in england
there sitte says they sell them but when yo uask the ysay we dont have much call for them so we dont stock them and its not worth buying just 1 dozen in dammm
and bass pro and cabelas dont have them either unless im not looking there correctly so anyone know of a store that will ship

thanks

RE: Arrow shafts ( am i doing something wrong ???)
 

Don't they work in reverse with the Easton??? say the 400 are lighter than 300??

RE: Arrow shafts ( am i doing something wrong ???)
 

400 are softer spine than 300and usually lighter if you are dealing with the same shaft.

Dan

RE: Arrow shafts ( am i doing something wrong ???)
 

Check these guys out - http://www.bowsports.com/

RE: Arrow shafts ( am i doing something wrong ???)
 

I knew it was something like Dan..;)