|
RE: THINKING RAGE
ORIGINAL: mobow So you're saying the blades "slide" along the hide before entering? |
RE: THINKING RAGE
ORIGINAL: mobow The Snypers have a 1.5" cutting diameter but the entrance holes I've had are usually 3" to 4" holes and the exit are usually 2" to 3". Can't explain it, just the facts on all the ones I've taken, 3" 4" holes on a 1.5" 2 blade broadheads. And for the record, the shot was lower and more forward than I would have liked but a dead deer in 50 yards. [8D] :D This was from a 1.5" Snyper.  |
RE: THINKING RAGE
Ok, so somebody w/ a 2 blade Rage, open those blades so they are sticking straight out, and measure the length......I only have a 3 blade, or I would.
|
RE: THINKING RAGE
Look at it this way Don....(and calm down.....it makes PERFECT sense).......
Go get an arrow (BH tipped)and shoot it through a sheet of paper shooting straight-on(Paper tuning). Now.....shoot it at a 45deg angle. Which hole is bigger? |
RE: THINKING RAGE
ORIGINAL: GMMAT Look at it this way Don....(and calm down.....it makes PERFECT sense)....... Go get an arrow (BH tipped)and shoot it through a sheet of paper shooting straight-on(Paper tuning). Now.....shoot it at a 45deg angle. Which hole is bigger? |
RE: THINKING RAGE
I don't think they're (Rage) bigger than 2" at any time.
|
RE: THINKING RAGE
ORIGINAL: GMMAT I don't think they're (Rage) bigger than 2" at any time. Okay, for mobow, I took pictures of my 1.5" Snypers. As they open they snap out to nearly 2.5" and then fold back to 1.5".   Rage, working this exact same way must open to nearly 3" before locking back into their 2" position. ;) |
RE: THINKING RAGE
Ok, completely objective question here, I have no reason to care what anyone shoots, simply put, I like Muzzy, I think Muzzy are the best BH ever made... for me that is... the question...
isn't the wide blade 2" or better a little more difficult to achieve penetration unless you have very good KE?? I seriously have no clue here, I read this, and heard it from a pro shop, so, what is the deal with the wider cutting dia? I was even told that the Muzzy MX head was to wide... |
RE: THINKING RAGE
Well I'll be damned. That's what I was looking for, thanks Rob. I tell ya, I learn something new here every damn day!! Who needs school when there's HNI??? [&:]:D:D
|
RE: THINKING RAGE
ORIGINAL: Vabowman Ok, completely objective question here, I have no reason to care what anyone shoots, simply put, I like Muzzy, I think Muzzy are the best BH ever made... for me that is... the question... isn't the wide blade 2" or better a little more difficult to achieve penetration unless you have very good KE?? I seriously have no clue here, I read this, and heard it from a pro shop, so, what is the deal with the wider cutting dia? I was even told that the Muzzy MX head was to wide... |
| All times are GMT -8. The time now is 08:55 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.