82nd draw weight adjustment ???
 

When my shop guy set my draw weight on my 82nd.....he told me he only took two turns out and the DW went from 71#'s to 62#'s.

Can I take another full turn out of the bolts and be "OK"? Any way to visually tell?

RE: 82nd draw weight adjustment ???
 

Jeff, you should be able to tell if the bolt is catching plenty jusy by looking. I think I went out that much on my 101 with zero problems. I'll check;)

Dan

RE: 82nd draw weight adjustment ???
 

Jeff, on my 101 I backed out a touch over 3 turns to get 60# so 3 turns should be Ok since the limb bolt and adjustment are the same on the 2.

Dan

RE: 82nd draw weight adjustment ???
 

So let me get this straight.....lol

You're telling me I can go home and give mine one more full turn?

Just checking....:D

RE: 82nd draw weight adjustment ???
 

I'd say that's no problem as long as you have plenty of bolt through and it has been backed out only 2 turns. Also watch the Rubber washer and make sure it keeps at least some tension on it.

Dan

RE: 82nd draw weight adjustment ???
 

I don't know the specs on 3 turns out......but I know it's WAY better for my arm than 2;)

Absolute DREAM shooting this v. 2 turns out....and only a SLIGHT sight adjustment.

RE: 82nd draw weight adjustment ???
 

If it was me. I'd run it all the way tight and then come out 2.5. Once it goes TWANG you've gone a tad too far!

I was "told" my ally was about 2.5 lbs per full turn. Funny I never checked either the max or what I'm at now, having backed it off 2 turns from my max hunting poundage.

RE: 82nd draw weight adjustment ???
 

Man Jeff your 82nd is more high maintence than Ms. Spears[8D]

RE: 82nd draw weight adjustment ???
 

Yeah and I'm getting ready to give mine a boob job that'll rival hers', too.

She needs someone to put the governors on her speed, too;)

RE: 82nd draw weight adjustment ???
 

Good point:D