Vetrix's clearance problem
 

I just noticed that I must have a clearance problem on my Hoyt Vetrix's.
I started shooting feather today and I am messing the feathers up on my pull back. I use a QAD Ultra drop away rest. I have been using the cock feather up and never noticed with 4" vanes. Has anyoneelse that shoots a Vetrixs had this plobem?
Mark

RE: Vetrix's clearance problem
 

If it's hitting the cables, just rotate your nock a little bit so it clears the cables on the way back.

RE: Vetrix's clearance problem
 

Just guess and test, if your bow is properly tuned, thats all you can do.

RE: Vetrix's clearance problem
 

I just checked every different arrow I own and none come close to the cable on my Vectrix. I even rotated the cock vane toward the cable to try to hit it. I would check the rest and make sure that its not to far in(toward the riser). Also check to make sure that you are not dragging the feathers backward through the rest?

RE: Vetrix's clearance problem
 

I had the same problem with the QAD on my Trykon. If the fletchings weren't lined up perfect I got contact. I got tired of messing with it. Went back to the WB. No problems since.