Injury Prevention-FMJ
 

I have seen two threads recentlyinvolving a carbon arrow exploding and injuring the bow hand. I am not familiar with the FMJ or similararrows but would the chances of this happening be reduced by using these arrows?? I know to flex my arrows after pulling and have been trying to get into that habit but as painful as those injurys look it makes me want to wear armour on my bow hand.

RE: Injury Prevention-FMJ
 

Thats a good question, i dont know a whole lot about the FMJ arrows. All i know is that i wouldnt want one shooting through my hand!

RE: Injury Prevention-FMJ
 

since FMJ arrows are alumanum wrapped around a carbon core i dont think you have much to worry about when shooting them. even if the carbon is broken on the inside the alumanum shell should be thick enough to hold it back....i dont know...

those pics scare us all. but most of the time its most likely not the arrows or the bows fault. the shooter hit it with another arrow or pulled it out and broke fibers etc. ive hit a couple arrows with broadheads...without knowing i had to hit them and without checking them i may never found the scratches on some of the really close calls. what i learned? dont shoot groups...pull the arrow straight out...and inspect them...as i walk 25 or 35 yds i certainly have time to check 3-5 arrows...no reason not to. im getting ready to buy new arrows....im pretty sure im going with carbons again. i cant see spending the money on FMJs ACCs or AC slims to have alumanum in them that can and will bend leaving you with a useless 10+$ arrow...thats just me...ive got a couple thousand shots on cheap carbons and i have no problems with them...

RE: Injury Prevention-FMJ
 

ive got a couple thousand shots on cheap carbons and i have no problems with them...
[/quote]

my thoguts exactly

RE: Injury Prevention-FMJ
 

i hope this time it worked
i am not gonna pay $100+ for 12 arrows when i can buy 2 dozen cheaper arrows for the same price

RE: Injury Prevention-FMJ
 

any arrom can break if it is damaged

RE: Injury Prevention-FMJ
 

Those photos scared me as well...Just a thought on this because I know stuff happens, but wouldn't it be a good idea to wear a good thick pair of gloves on your bow hand? Just a thought.

RE: Injury Prevention-FMJ
 

The glove would have to be very thick leather andyou would loose feel with the bow. Plus, I wouldn't want to have a heavy glove on in the middle ofsummer. Inspect your arrows.

Bullet where are you finding 2 doz carbons for $100?

RE: Injury Prevention-FMJ
 

You would think somebody would invent some sort of safetyprotectorto prevent this. Maybe something out of kevlar which would be made to deflect the arrow off the hand. I don't believe it would have to be a full glove, but it could be incorporated into a glove. Some gloves are fine for shooting. Personally, I wear silk glove liners sometimes wile shooting. They are nice and slick, and the bow easily goes into position.

RE: Injury Prevention-FMJ
 

Personal opinion as I have no technical data to back this up but.....I do feel safer using ACC's or my A/C Superslims. Why? Because in the event I do not find a crack, split, etc. initially, if their is one in the carbon outer shell, I feel safer shooting them. On another note: though they(ACCs and A/C Superslims) are expensive, so are some of the top end carbons manufactured these days. I have also found that my A/C Superslims are much tougher than some give aluminum/carbon arrows credit for. I have made a shot or two with mine[:-] that would have shattered most any carbons....and they remained as straight as they were when I bought them.

Again, just in case I don't find a hairline crack if there is one, I do feel safer shooting the aluminum/carbon. Just my opinion.

RE: Injury Prevention-FMJ
 

I would bet that if you shoot at different targets you wouldn't have to worry about this.

Tom

RE: Injury Prevention-FMJ
 

That's a great idea Bob.

They should be able to make a fingerless vented glove like that. Just modify the kevlar that is used in motorcycle gloves. i have a set of gloves that are breathable and have kevlar on the nuckels. Why not make a plate for that area of the hand?

RE: Injury Prevention-FMJ
 

Exactly.;)

Could proably even build as part of a compound bow as long as it was flexible.

RE: Injury Prevention-FMJ
 

Even aftermarket ad on it could be done. The wheels are turning on this and I smell some smoke. Both pictures I've seen the guys where hit in almost the exact same spot on their hand. Even though one was a lefty. The arrow slides over the thumb and into the meaty part between the thumb and finger.

RE: Injury Prevention-FMJ
 

Let me know when I can get one because "The arrow slides over the thumb and into the meaty part between the thumb and finger" hurts even when I read it. Ill take a large lefthand in M.O. Obsession.

RE: Injury Prevention-FMJ
 

yes i fell safer and teh FMJs i ahve havent bent yet with hundreds of shot on em come on man think about it the carbon keeps teh aluminum straight and the aluminum keeps the arrow from exploding during the shot its like a double layer protection anyway i have shot thousands of shots on Gold tips and no problems yet just flex and check plus i will gurantee you that if you get a box of carbon for 50 bucks they dont have great tolerances first of all and you will have some to throw away because they dont fly right or have a bad or weak spine. That is my experiences with cheap carbons.

RE: Injury Prevention-FMJ
 

That doesn't even come close to the pictures I've seen. I'll try to find one.