Need Help On My Feeder!
 

I'm building a Corn feeder and i got the spinner thing that throws the corn and the barrel(metal 50 gallon) and i was wondering how high to mount it on a tripod...i have access to a welder and metal so anything would be helpful. how high do you guys have yours???

Thanks

>>-Hoyteen->

RE: Need Help On My Feeder!
 

Do you have bears? If so, I would hang it from a limb away from the tree and with metal cable at a height where the tripod legs you can attach to the barrel are at least 8 feet or higher off the ground.

If not, I would think having the spin plate even 6 feet off the ground should allow for plenty of dispersal area.

RE: Need Help On My Feeder!
 

Feeders?[:'(]

RE: Need Help On My Feeder!
 

yea thats what all yall non texas guys always say[:'(]but if you hunted where i did youll see why we use feeders they are very important where i hunt so[:'(]to your tree hunting and.....[:'(]hahahahah nah im just playin but feeders are important over here...and as for feeder height i would say about 6 ft-5ft unless you got bears put it on a tree

RE: Need Help On My Feeder!
 

I had my feeder on 12 foot legs.

If you have hogs in the area then use some T posts, drive them into the ground in the oposite direction of the legs and tie the legs to the T posts.


http://img.photobucket.com/albums/v1...s/DCP_2462.jpg
As you can see the hogs will dig around the legs and eventually the feeder will toppel over if you dont secure the legs with T posts.

http://img.photobucket.com/albums/v1...s/DCP_2541.jpg

RE: Need Help On My Feeder!
 

thanks guys...all i want it for is the backyard to watch em grow....i live in michigan and we don't have anybears in the area or hogs...thanks again!