![]() |
100 or 125 grain broadhead
can you'll list some pros and cons for using a 100 gr. vs. a 125 grain...i don't really see any other then which on makes your arrows fly better?that and it is much easier to find a 100 grain broadhead then a 125 grain.
josh |
RE: 100 or 125 grain broadhead
I have been wondering about the same thing too. I would think the 100 grain would fly faster and farther, but I could be totally wrong. I use 125 grain only because where I get my supplies they have both and I went with the rifle mentality that bigger is better. But, this could be totally wrong.
|
RE: 100 or 125 grain broadhead
lighter = faster less drop hever= bigger hole
|
RE: 100 or 125 grain broadhead
Depends on your shaft. It has to match of course. I shoot 125s because I want the heavy weight and max penetration.
|
RE: 100 or 125 grain broadhead
100 is goodfor deer100unless you are hunting elk
|
RE: 100 or 125 grain broadhead
If you shoot a shaft that has a lot of flex then you want to shoot a lighter broadhead, because heavier will cause it to bend more and be slower!
Now if you shoot a shaft that doesn't have much flex than you can shoot either depending on which one performs better for you! Personally I choos a a light broadhead because i like maximize the speed i can get out of my bow, and plus thats just what works for me. |
RE: 100 or 125 grain broadhead
thanks guys, i am shooting a newer parker (05 model) am shooting around 290 fps or so, have always been shooting a 125 graing (31 inch draw, carbon arrow's) but wanted to buy some mechanical broadheads that had a large cutting diameter, but most makers only make the larger sizes in 100 grain... so i got some practic tips with 100 grain and shot them and they seem to be faster, but other than that i couldn't see any real differences.....
thanks for the advice guys...since i only shoot blacktails and maybe a black bear i think the 100's for now will be fine... josh |
RE: 100 or 125 grain broadhead
Why is it that people get all wrapped up in a curtain weight head is best. It's only best if it matches your shaft. Yes lighter is faster, but just lighter mean nothing if it's not on a matching shaft. If you're after speed, then by all means go with lighter and find a shaft to match. If you favore more momentum and want penetration, then go heavier with a shaft to match. If you're shooting 100s on the same shaft you shot 125s it can be or maybe not.... a proper match. If you're shooting 290 with 125s why do you feel a need for more speed? Really, I don't see the point of this at all.
|
RE: 100 or 125 grain broadhead
Then why chime in?
|
RE: 100 or 125 grain broadhead
Speed is momentum, which equals more penetraton!
|
RE: 100 or 125 grain broadhead
125's baby! Seriously though I love my G5 in 125 gr. Go Big or go home. :D
|
RE: 100 or 125 grain broadhead
ORIGINAL: JNTURK thanks guys, i am shooting a newer parker (05 model) am shooting around 290 fps or so, have always been shooting a 125 graing (31 inch draw, carbon arrow's) but wanted to buy some mechanical broadheads that had a large cutting diameter, but most makers only make the larger sizes in 100 grain... so i got some practic tips with 100 grain and shot them and they seem to be faster, but other than that i couldn't see any real differences..... thanks for the advice guys...since i only shoot blacktails and maybe a black bear i think the 100's for now will be fine... josh |
RE: 100 or 125 grain broadhead
Then why chime in? |
RE: 100 or 125 grain broadhead
ORIGINAL: davidmil Then why chime in? LOL! That's what the forums are for, right? The only difference I've found in 100's vs 125's is in tuning my bow. Really, at hunting-distances, 25 grains isn't going to make that much difference in speed or penetration. I shoot 100's on one bow, but my back-up bow shoots with the 125's a little more consistantly because I turned the poundage down a bit, and so the arrows I had were a tad over-spined. But I agree that if you want to shoot mechanicals, there's a little better selection in 100's. |
RE: 100 or 125 grain broadhead
David- i dont' really care about speed at all...i just wanted to know if the more active archers new anything about the differences of the two....thanks for your alls input..
atcfisherman- it is a parker hunter mag...i like it, but was difficult to get use to shooting fingers at 31 inch draw, but i really like it know and how light weight it is.. |
RE: 100 or 125 grain broadhead
I shoot 125's because I HAVE all the speed I need....and I want as much "PUNCH" in my arrow as I can get. I like a HEAVY arrow (450g+) fro hunting (as a friend has recommended). I shoot 100g tips for targets. I've never done anything scientific to figure it out....but I use the same arrow for both heads with no tuning issues.
|
RE: 100 or 125 grain broadhead
Well i use 100 becuase for my bow they fly smother. I used 125 and they flew different.
|
RE: 100 or 125 grain broadhead
I've always used 125's. When I first started bowhunting, the field points that everyone was shooting were 125g, so it made sense to get the same weight BH. Now that I give some thought to it, I like the better FOC % that I get with the 125's, it gives my shorter length arrows a better spine match and a bit better penetration. The FP and BH still weigh the same and fly to the same point of impact, so I've seen no reason to change - except the 125's are hard to find around here.
|
RE: 100 or 125 grain broadhead
Speed is momentum, which equals more penetraton! Speed without weight is nothing. The only way to get more speed out of a particular bow, provided everything stays the same on that bow,is to use a lighter weight arrow and this equals LESS momentum and less penetration than the heavier but slower arrow. The only 2 reasons to use one over the other is to get a properly spined and ballanced shaft. A shaft with a 400 spine may be just right with a 100 grain broadheadbut be too weak with a 125 grain broadhead and not give proper arrow flight in which case you would want to step up to a stiffer shaft...... say a 340 shaft. A shaft with an overall heavier physical weight will require a heavier weight broadhead in order to give that shaft a proper FOC or ballance point. Also, just because a particular shaft is heavier in physical weight does not necessarily mean that it is stiffer than a lighter weight shaft. |
RE: 100 or 125 grain broadhead
Heres the result in my testing of Muzzy broadheads:
Bow: Mathews Outback 70lb, 27" draw Arrow Gold Tip hunters 55/75 broadheads 75,100,125 grain Muzzy 3 blade 75 grains at 25 yards Dead bullseye ... Penatration average 17" 100 grain at 25yards 2 1/2 " low .... Penetration average 22" 125 grain at 25 yards 5 1/4" lowPenetration average full arrow, some passed thru target was a layered foam broadhead target I got at menards. I always shot 125's, good penetration (all pass thrus) good blood trail. this year I went to 75's to try and flatten out my trajectory. What was my 20 yard pin with the 125's now became my 1" low at 30 yard pin. But the first deer I shot was a yearling doe, maybe 85lbs field dressed. The shot was a double lung at 22 yards, the arrow was laying on the ground, it passed thru, but did not have enough energy to hit the ground. With my 125's I actually have shot thru a doe (120lb field dressed) passed thru and stuck about an inch into the tree that was behind her a few yards. Impressive. I switched to the 100's in order to try to get a little of both worlds, speed and kinetic energy. |
RE: 100 or 125 grain broadhead
Actually, I can not give much in the way in pros and cons between the two. Use the one that flies the best and tunes to the bow. 25 grains is not much of a difference.
|
RE: 100 or 125 grain broadhead
Bigger the better
ive always used 125 |
RE: 100 or 125 grain broadhead
ORIGINAL: monster10rackstack 100 is goodfor deer100unless you are hunting elk |
RE: 100 or 125 grain broadhead
i use 100gr becuase my arrows flys faster and seems to work with my arrows better.
|
| All times are GMT -8. The time now is 11:07 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.