muzzy 3blades or muzzy 4blades
 

i plan to shoot some deer and some hogs with these broadheads but i dont know what to choose..is there any difference in flight or penetration?i use a browning bow set At 50 lb with a 24 inch draw and use cabon excell arrows by easton if that changes any answersat all.is there any change in speed?

RE: muzzy 3blades or muzzy 4blades
 

oh yeah im planning to use 100 grains what do yall think?or should i use something lighter or heavier?

RE: muzzy 3blades or muzzy 4blades
 

I personally prefer 4 blade, just because you get that much more cutting surface. BUT, in your case, I think I would go w/ the 3 blade. That extra cutting blade also adds more drag, reducing penetration.

RE: muzzy 3blades or muzzy 4blades
 

ok mobowhuntr thanx again;)

RE: muzzy 3blades or muzzy 4blades
 

personally with 50lbs and 24inch draw i would go with cut on contact like magnus stingers

RE: muzzy 3blades or muzzy 4blades
 

I just got the new Muzzy MX-4 and they are awesome.

RE: muzzy 3blades or muzzy 4blades
 

ok but why magnus stingers what is the advantage

RE: muzzy 3blades or muzzy 4blades
 

I HAVE USED MUZZY 3 BLADES FOR SEVERAL YEARS AND HAVE NEVER HAD A BAD EXPERIENCE. IF YOU USE THREE BLADE YOU CAN ALIGN YOUR BLADES WITH YOUR FLETCHING ALLOWING FOR A MORE TRUE ARROW FLIGHT.THE CHISEL POINT ISLETHAL ON BONE IF YOU HIT A SHOULDER OR SPINE.

RE: muzzy 3blades or muzzy 4blades
 

I have shot 3 blades for many years and the 3 blades muzzys work great for me - most deer dropping with-in 45 yards. The 3-blade heads don't offer as many cutting surfaces, BUT they are significantly wider.

RE: muzzy 3blades or muzzy 4blades
 

ok so yall mainly suest 3 blades? so i uess thats what im goin with but i want to make sure with going to the shop

RE: muzzy 3blades or muzzy 4blades
 

I shoot 4 blade muzzy's because I get excellent flight with them. The 3 or 4 blade will work equally well.

The"drag" difference will be unnoticed in the two heads. Your shooting into an animal that is full of lubricating fluids not a foam target. The cutting surface is not enough to make a difference either. Also you do not have to line up three blade heads with the fletching...makes no difference what so ever.

Just shoot the ones that fly the best and put it in the right spot and everything will be fine.

RE: muzzy 3blades or muzzy 4blades
 

Three blades.

RE: muzzy 3blades or muzzy 4blades
 

I would go with the 3 blade. I used to shoot the 4 blade but I felt that the 3 blade flew better...

RE: muzzy 3blades or muzzy 4blades
 

Muzzy mx-4. great flight.

RE: muzzy 3blades or muzzy 4blades
 

i think im goin with 3 blade yes