![]() |
String Wax
I bought some Brownell's string wax when I got my bow... I have a couple questions though.
1) is this a decent wax, is there better? 2) What part of the string do I wax? The entire string including the part which runs through the cams? 3) How often should I wax? Thanks! |
RE: String Wax
i was told any wax is good, its all preference. apply the wax to EVERY part of the string, yes that includes that parts around the cams and whatnot. apply it after every use, and rub it in good.
|
RE: String Wax
someone told me to use suede leather to rub it in... Is that a good idea?
|
RE: String Wax
Yes. Use leather. I do the longer areas first to warm up the leather so it helps melt the wax in at the shorter areas where its harder to get to.
|
RE: String Wax
Just don't over do it! Try to get all the excess wax off your string! I have never used the leather before I just put it between my fingers and work the wax in good! JMO!
|
[Deleted]
[Deleted by Admins]
|
RE: String Wax
I have heard not to use leather. The thought process is to heat up the wax so it melts and makes it easier to get in between the strands. The problem is, too much heat may damage your string. I just use my fingers and work it in really well. If you have access to a bow press, that makes it easier to get in between the strands.
|
RE: String Wax
ORIGINAL: G2 Shooter I have heard not to use leather. The thought process is to heat up the wax so it melts and makes it easier to get in between the strands. The problem is, too much heat may damage your string. I just use my fingers and work it in really well. If you have access to a bow press, that makes it easier to get in between the strands. ![]() |
RE: String Wax
I didn't say that I damaged my string. Only that is what I have been told. I haven't used a piece of leather only because I didn't want to chance it but it make work fine.
|
RE: String Wax
I just use my fingers. Years ago (mid 70's) when I was a kid starting out on long and recurve bows I used a piece of leather.The newer waxes of today howeverheat up and melteasier than they used to. You can still use one, but I don't think it's necessary anymore. I have found that it dooesn't take as much heat to get the wax into the string like it used to.
|
| All times are GMT -8. The time now is 05:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.