difference in broadhead and field point
 

whats the average distance you guys get between your broads and you field tips(your group)?

RE: difference in broadhead and field point
 

http://www.bowmaker.net/tuning.htm

Check this out. It will explain there should be no difference ( The bareshaft tuning section)

RE: difference in broadhead and field point
 

I was getting about a 2" lower difference from my broadheads.My nock was about 1/4" high.I moved it down to about 1/8" high,and now they are hitting the same.I had to adjust my sight after I moved my nock point.I'm shooting RM titanium 100's.

RE: difference in broadhead and field point
 

If my broadhead doen't strip the feathers off the arrow with the field tip I retune until it does.

RE: difference in broadhead and field point
 

Its cheaper if you shoot the broadhead first. ;)

RE: difference in broadhead and field point
 

Mine group in the same spot. If they don't then something is wrong.

RE: difference in broadhead and field point
 

What Sniper and bigbulls said. I like to able to shoot 1/2" to 1" three shotgroups at 25 yards with broadheads. It gets real ugly sometimes. Blades, feathers, carbon, nocks laying everywhere. Gives me an excuse to get some newer arrows.

RE: difference in broadhead and field point
 

Leverdude, Yes it can get expensive, but I don't use my practice or 3-D arrows for hunting. My hunting arrows stay in the quiver with the broadheads attached. They are for hunting only.
Good Hunting...

RE: difference in broadhead and field point
 

My broadheads shoot exactly the same as my field points. As a matter of fact, I do not shoot my field points anymore.

RE: difference in broadhead and field point
 

The difference is that the broad heads have sharp blades on them.[&:];):D