Problems w/ Mathews Q2?
 

I have noticed that the string travel on my right handed Mathews Q2 is such that the string seems to be pulled to the right. That is rather than the string moving in line with the center of the bow, the string instead follows a path angled to the right. This problem is also evident by the greater amount of wear on the right prong silencer on my Quiktune rest. Despite adjustments in centershot, the right prong silencer always shows significantly more wear.

My brace height measures 7 1/4" and my axle to axle measurement is 34 1/4". This is slightly different than the factory specs of 7 1/2" and 34" respectively. Technical support at Mathews maintains that my problem would be solved by twisting the string and/or cable so as to meet the specs for brace height and axle to axle length. DOES THIS SOUND CORRECT? IF I CAN GET A PERFECT BULLET HOLE AND GOOD ARROW GROUPING SHOULD I BE CONCERNED ABOUT THIS PROBLEM?

I planned on hunting with the bow this season, after which I will be due for a new string. I thought after installation of the new string would be a goOd time to deal with the problem. ANY COMMENTS OR SUGGESTIONS?

RE: Problems w/ Mathews Q2?
 

I would not mess with it if it is shooting strait.


If information provided by the members of this board have helped you please let us know .