Admiral Drawback Noise:Fixed Update PG2
01-08-2009 | 08:59 AM
#11
Thread Starter
Joined: Feb 2005
Posts: 202
Likes: 0
From:
RE: Admiral Drawback Noise
With my previous Issue I emailed Bowtech and John Nelson responded very quickly. But I emailed Bowtech from their website yesterday with no response and I tried Johns Direct email and it is now undeliverable.......Any one know if he is still there? or are they just having Server issues?
01-08-2009 | 09:05 AM
#12
Thread Starter
Joined: Feb 2005
Posts: 202
Likes: 0
From:
RE: Admiral Drawback Noise
No Such luck. The cables wont fit through the gap.....
ORIGINAL: MOhunter46
Justpull up and out and they should popright off
Wayne
ORIGINAL: Buck442
Mohunter....How did you get the cables off the roller guard?
Mohunter....How did you get the cables off the roller guard?
Wayne
01-08-2009 | 10:38 AM
#13
Guest
Posts: n/a
RE: Admiral Drawback Noise
I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise.
01-08-2009 | 11:55 AM
#14
Nontypical Buck
Joined: Mar 2008
Posts: 1,760
Likes: 0
From: Henderson, KY
RE: Admiral Drawback Noise
ORIGINAL: bigcountry
I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise.
I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise.
Derek
01-08-2009 | 12:48 PM
#15
Guest
Posts: n/a
RE: Admiral Drawback Noise
ORIGINAL: drockw
Its different with the new CP BT's tho right? They arent clamped on there or there/moving parts/clips to make asound like that.
Derek
ORIGINAL: bigcountry
I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise.
I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise.
Derek
01-08-2009 | 05:03 PM
#16
Nontypical Buck
Joined: Oct 2007
Posts: 2,046
Likes: 0
From: Warsaw,MO
RE: Admiral Drawback Noise
ORIGINAL: Buck442
No Such luck. The cables wont fit through the gap.....
No Such luck. The cables wont fit through the gap.....
ORIGINAL: MOhunter46
Justpull up and out and they should popright off
Wayne
ORIGINAL: Buck442
Mohunter....How did you get the cables off the roller guard?
Mohunter....How did you get the cables off the roller guard?
Wayne
Wayne
02-07-2009 | 08:34 AM
#18
Thread Starter
Joined: Feb 2005
Posts: 202
Likes: 0
From:
RE: Admiral Drawback Noise
Just picked mine up up from the shop last night and now quite as a church mouse. They messed with it a while and could not fiqure it out and then called Bowtech. I explained to them when I brought it in that I had emailed Bowtech and they said just call the warranty dept....Anyway after they called they were instructed thate there was not enough/or no lubricant where the limbs pivot at the center point on the black plastic looking tabs. They took the limbs off and placed some type of white looking gel there and she now is back to normal.
I pretty sure my Dream Bow is back!
I pretty sure my Dream Bow is back!
02-07-2009 | 06:06 PM
#19
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: Admiral Drawback Noise
ORIGINAL: Buck442
Just picked mine up up from the shop last night and now quite as a church mouse. They messed with it a while and could not fiqure it out and then called Bowtech. I explained to them when I brought it in that I had emailed Bowtech and they said just call the warranty dept....Anyway after they called they were instructed thate there was not enough/or no lubricant where the limbs pivot at the center point on the black plastic looking tabs. They took the limbs off and placed some type of white looking gel there and she now is back to normal.
I pretty sure my Dream Bow is back!
Just picked mine up up from the shop last night and now quite as a church mouse. They messed with it a while and could not fiqure it out and then called Bowtech. I explained to them when I brought it in that I had emailed Bowtech and they said just call the warranty dept....Anyway after they called they were instructed thate there was not enough/or no lubricant where the limbs pivot at the center point on the black plastic looking tabs. They took the limbs off and placed some type of white looking gel there and she now is back to normal.
I pretty sure my Dream Bow is back!
Another
for BowTech's service!Dan
